igus drylin ZLN toothed belt axis

Tuesday, 03 September, 2019 | Supplied by: Treotham Automation Pty Ltd



igus has combined its drylin N low-profile linear guide with a toothed belt and has developed the drylin ZLN toothed belt axis. Whether in vending machines, service robotics or in automation systems, the compact toothed belt system can be installed quickly and easily in small spaces.

The flat drylin N linear guide is compact at 27 mm high and 40 mm wide. The toothed belt mounted on ball bearings enables high-speed dynamics. With the combination of low-profile linear guide and toothed belt, loads up to 20 N can be moved vertically at a ratio of 60 mm per revolution. By using high-performance polymers in the sliding carriage, users can dispense with lubricants and thus the maintenance of the unit.

The toothed belt axis for automation consists of standard components from the drylin modular system that can be fitted together and assembled quickly. A completely ready-to-install drylin ZLN with a length of up to 750 mm can be ordered with NEMA stepper motors or with EC/BLDC DC motors as well as a suitable dryve control system.

Online: www.treotham.com.au
Phone: 1300 65 75 64
Related Products

IDEC MicroSmart FC6A Plus PLC software update

IDEC Corporation has announced an update to add EtherNet/IP communications to the MicroSmart FC6A...

Leuze DRT 25C dynamic reference diffuse sensor

The DRT 25C sensor works with three light spots and references the conveyor belt instead of the...

Red Lion Crimson 3.2 edge controller software

Red Lion has released version 3.2 of its Crimson software to complement its FlexEdge platform.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd