Novaris IS surge and lightning protectors

Thursday, 28 March, 2019 | Supplied by: Control Logic Pty Ltd



The Novaris IS range of surge and lightning protection products is designed specifically for hazardous areas. They are certified intrinsically safe according to IEC Ex and ATEX; the group IIC T4 certification makes them acceptable for use with all gas/air mixtures.

Novaris slimline surge protection devices (SPDs) provide surge protection for most twisted pair signalling schemes. Certified to be intrinsically safe Novaris IS SPDs can be installed in the hazardous zone or the field side of the IS barrier. This not only provides protection for the PLC or RTU I/O, it also provides protection for the IS barrier.

With two different base options the SL protectors offer either direct earthing via DIN rail, for the most effective, low impedance earth connection (-G base), or a connection via GDT to the DIN rail, offering isolation under normal conditions and equipotential bonding during a surge (-EC90 base).

The plug-in design provides simple and rapid replacement and testing with no rewiring needed. This also provides a convenient method of field equipment isolation if required.

Online: www.controllogic.com.au
Phone: 1800 557 705
Related Products

maxon motor right-angle brushless DC gearmotor

maxon motor has released a gearmotor with a 48 V brushless DC motor and righ-angle helical bevel...

ABB Dodge Food Safe mounted ball bearings

ABB's Dodge Food Safe mounted ball bearings are designed to withstand caustic, high-pressure...

E2S STEx warning signals and beacons

The explosion-proof and flameproof STEx range encompasses audible, visual and combined warning...


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd