Phoenix Contact Uno Power decoupling diode

Wednesday, 20 August, 2014 | Supplied by: Phoenix Contact Pty Ltd

Phoenix Contact Uno Power decoupling diode

The Phoenix Contact Uno Power diode, which is 22.5 mm wide, decouples power supplies connected in parallel, thereby increasing operational reliability.

Due to their high power density, the power supply units in the Uno Power power supply range are suitable for loads up to 100 W, especially in compact control boxes. When used in sensitive applications that require high availability, redundant power supplies are recommended. If the power supplies, which are operated in parallel, are also decoupled by the diode, a short circuit at the output of one of the power supply units or in the supply line from the power supply unit to the diode will have no effect on the load. The diode operates with an input voltage range of 4.5 to 30 VDC and nominal input currents of 2 x 10 A or 1 x 20 A. The module is snapped onto the DIN rail without spacing either side and operates at ambient temperatures from -25 to +70°C, making it suitable for industrial use.

There are 15 corresponding Uno Power power supplies with output voltages from 5-48 VDC currently available. The power supply units reduce energy consumption through low idling losses below 0.3 W and optimised efficiency of over 90%.

Online: www.phoenixcontact.com.au
Phone: 1300 786 411
Related Products

Phoenix Contact Trio Power power supply

The third-generation Phoenix Contact Trio Power power supply is now available with a protective...

Phoenix Contact PTCB 48 VDC circuit breakers

The PTCB single-channel circuit breakers can now protect loads with a supply voltage of 48 VDC.

NORD Drivesystems single-phase IE2 motors

The more efficient single-phase asynchronous motor now corresponds to efficiency class IE2.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd