Ilme CR BDSH terminal bridges

Tuesday, 02 June, 2020 | Supplied by: Treotham Automation Pty Ltd

Ilme CR BDSH terminal bridges

Installed on the connectors of the Ilme CDSH series, the CR BDSH bridges reduce the number of connections inside a control panel, creating an electrical connection in parallel for low-voltage circuits that require, for example, a common extralow-voltage feed or the return of the neutral circuits or functional earth.

The combination of a parallel connection applied to ILME SQUICH technology without tools avoids the need to wire each sensor or actuator individually and further reduces the overall working time and costs. Only one wire is needed; all the others are shunted together by the CR BDSH parallel bridge.

The series is available in two colours — blue and green identified by the suffix A and G — and four dimensional formats of three, six, nine and 14 poles, depending on the connector chosen or the specific application. The enamelled insulating coating allows an electrical rating according to EN/IEC 61984 of 50 V or 0.8 kV.

Online: www.treotham.com.au
Phone: 1300 65 75 64
Related Products

Phoenix Contact Trio Power power supply

The third-generation Phoenix Contact Trio Power power supply is now available with a protective...

Phoenix Contact PTCB 48 VDC circuit breakers

The PTCB single-channel circuit breakers can now protect loads with a supply voltage of 48 VDC.

NORD Drivesystems single-phase IE2 motors

The more efficient single-phase asynchronous motor now corresponds to efficiency class IE2.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd