Ölflex SERVO FD 796CP servo cable

Click2Contact

The Ölflex SERVO FD 796CP is an EMC-compliant servo cable supplied by LAPP. It is designed to allow for much faster speed and accelerations, increasing the economic efficiency of the machine.

Designed for high-speed multiple changes of position the Servo FD 769CP cable supports an acceleration of up to 50 m/s², at speeds of up to 5 m/s and travel distances up to 3 m. This makes work considerably faster and more efficient than was possible with previous drag chain cables. In addition, the proportional run-up and braking times have been reduced by up to 96%.

With a wide application range, this cable is suitable for various uses. It can be used for connecting cables between a servo controller and motor, in power chains or moving machine parts, or for use in assembling and pick-and-place machinery. In addition, it is safe to use in wet areas of machine tools and transfer lines.

The low-capacitance polyolefin insulation assures lower EM-effective leakage currents while simultaneously providing high dielectric and electrical strength. It is halogen-free and flame retardant and meets key certifications, including UL-AWM, CSA AWM and VDE.

For more information: https://lappaustralia.com.au/en/vsd-servo-screened-dragchain.