Compact cylinder
07 April, 2009 | Supplied by: Metal Work Pneumatic Australia Pty Ltd
The Two-Flat version of Metal Work Pneumatic’s Compact and ISO/VDMA cylinders is now available. The Two-Flat cylinder uses a piston rod with two longitudinal flat surfaces that is guided by a matching, sintered-bronze bush to stop rotation. This means that anything fixed to the rod will not rotate and it will resist any torque applied within the limits specified. A special polyurethane seal prevents the accumulation of dirt.
Compressor range with energy efficiencies
07 April, 2009 | Supplied by: Boge Compressors (Australia) Pty Ltd
The SO-W series screw compressors have been improved in the free air delivery (FAD) and with up to 4% in the specific power required (kW/m3/min).
Differential pressure gauges
02 April, 2009 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The Noshok 1000 series digital pressure gauge offers accurate digital pressure indication. The gauge features an integrated battery with up to 4000 h of battery life, eliminating the necessity of fixed power supplies.
Air breathing unit
02 April, 2009 | Supplied by: Truline Engineering Services
The Breathing Air Unit for compressed air is purpose designed and built to be used for the supply of high-quality, filtered and regulated breathing air to industrial breathing respirators and masks.
Grommet enclosure for solenoid valves
02 April, 2009 | Supplied by: Parker (Aust) Pty Ltd
Parker Fluid Control Division, manufacturer of the Skinner and Gold Ring lines of solenoid valves and the Sinclair Collins line of process control valves, announces the release of a grommet coil enclosure for its Series 204 and 304 solenoid valve lines.
Compressed air preparation unit
02 April, 2009 | Supplied by: IMI Precision Engineering
The Excelon Pro 92 FRL series consists of a general-purpose filter which is available with a ¼ turn manual or automatic drain, a coalescing filter which includes a pressure drop indicator and automatic drain as standard. The series has a standard regulator featuring a built-in pressure gauge with both bar and psig ranges and a second filter/regulator which includes all the features of the standard regulator and filter in one unit.
Environmentally friendly compressors
01 April, 2009 | Supplied by: Hitachi Global Air Power
Champion Compressors has introduced its Enviro range — a series of environmentally friendly cost-efficient air compressors. Complementing Champion’s comprehensive range of rotary screw compressors, the compact tank-mounted Enviro series delivers reliable compressor performance, while providing a number of built-in EH&S features.
Industrial pumps
01 April, 2009 | Supplied by: Hydra-Cell Pumps Limited
Hydra-Cell pumps can handle recycled fluids with particles in suspension of up to 500 µm.
Compact serial valve manifold
01 April, 2009 | Supplied by: SMC Australia | New Zealand
When available space is at a premium, as is often the case on machines and in control cabinets, the ability to source a compact, fully centralised, serial controlled valve manifold is essential. The EX250 serial interface provides a compact solution and can use either of the proven SV and VQC series of valves that are available in a number of sizes and flow rates. The EX250 is easily configured with digital input and digital output modules to suit additional control requirements and supports many serial protocols including ethernet, EtherCat, Profibus, DeviceNet, AS-i and Modbus. The EX250 has an IP67 enclosure rating as standard for those wet and dusty areas, which also makes it suitable for out-of-cabinet installation.
Compressed air filters
01 April, 2009 | Supplied by: SMC Australia | New Zealand
Mainline filtration provides the source of clean air direct from compressor installations. It is essential that correct filtration is installed to ensure clean compressed air is provided to processes.
Serial valve manifold
01 April, 2009 | Supplied by: SMC Australia | New Zealand
The EX500 serial interface is a cost-effective solution that can use up to four decentralised input blocks and four output blocks to position control where it is most effective.
Rotary vane actuators
01 April, 2009 | Supplied by: Pneumatic Products
The VRX rotary vane actuators from Tolomatic deliver up to 54.7 Nm of torque at 100 psi (6.9 bar) and can withstand high axial loads of up to 102 N. These pneumatically operated rotary vane actuators are designed for use in material handling, part feeding and clamping, pick-and-place operations, cutting and many other industrial automation applications requiring rotary motion.
Linear actuator
15 March, 2009 | Supplied by: Pneumatic Products
The MXB-U belt-driven linear actuator from Tolomatic features an unguided carriage system that is capable of velocities of up to 500 cm/s and accelerations of up to 3000 cm/s2.
Abrasion-resistant tube
14 March, 2009 | Supplied by: SMC Australia | New Zealand
SMC Pneumatics has released an abrasion resistant tube for use in areas where movement of the tube can be expected. The TUZ range of tube is designed to withstand abrasion that comes from tube flexing and movement especially within a flexible cable train environment.
Belt-driven actuators
14 March, 2009 | Supplied by: Pneumatic Products
The MXB-P belt-driven linear actuators from Tolomatic feature a profiled rail guidance system that allows large moment loads, high-speed operation and high precision. With a carriage that employs THK Caged Ball bearings, the MXB-P linear actuator is capable of velocities of up to 3810 mm/s and accelerations of up to 30.48 m/s2. MXB-P belt-driven actuators are suitable for multi-axis applications such as test stations, product handling, laser marking, material cutting, adhesive dispensing or applications that require high linear velocities and accelerations, long stroke lengths and high duty cycles.
