Polarographic oxygen measurement
26 November, 2011 | Supplied by: Mettler-Toledo Ltd
For the measurement of oxygen in continuous process analysis, several technologies are available. Because they differ widely in terms of application coverage, field performance and ease of use, the right technology has to be carefully chosen.
Keller Series 35X HTC high-temperature pressure transmitter
21 November, 2011 | Supplied by: Bestech Australia Pty Ltd
The Series 35X HTC high-temperature pressure transmitter from Keller is primarily designed for biotechnology and food industry applications. The pressure of hot media applied to the diaphragm is transferred via an exposed oil-filled spiral capillary to the sensing element. Heat to a maximum of 300°C is therefore safely dissipated to the atmosphere before it reaches the sensing element when the sensor is optimally mounted.
Finetek SE250 rotary paddle level switch
21 November, 2011 | Supplied by: Process Control Services Pty Ltd
The Finetek SE250 rotary paddle level switch is a low-cost rotating paddle switch for level measurement of solids, grains or powders. The spring-loaded folding paddle allows quick and simple installation and removal of the unit from outside of the vessel, simplifying installation and maintenance.
Inline oxygen sensor wins award
21 November, 2011 | Supplied by: Mettler-Toledo Ltd
Mettler Toledo has won the Gold Award for the InPro 6850i G inline oxygen sensor in the Gas Analysis category at the 2011 Golden Gas Awards.
Weber vent-captor 3202.30 airflow meter
16 November, 2011 | Supplied by: Automated Control Pty Ltd
The Weber vent-captor 3202.30 airflow meter is small, self-contained and epoxy resin-encapsulated. It is claimed to operate with high accuracy and repeatability even under changing working conditions.
Honeywell 854 Servo level gauge with enhanced overfill detection
08 November, 2011 | Supplied by: Honeywell Process Solutions
Honeywell has announced key enhancements to its 854 Servo level gauge, which is now equipped with a Servo Auto Test feature. This solution has been approved for Safety Integrity Level-2 and 3 (SIL-2/SIL 3) applications and increases the gauge’s diagnostic coverage.
Mettler Toledo ISM technology
07 November, 2011 | Supplied by: Mettler-Toledo Ltd
ISM (Intelligent Sensor Management) technology from Mettler Toledo is designed to allow users of process analytical equipment to reduce the maintenance costs of loops, while increasing the safety of the production process. Sensors equipped with ISM are continuously monitored for defects and wear to anticipate failure before it happens.
Mettler Toledo M800 multichannel, multiparameter transmitter
04 November, 2011 | Supplied by: Mettler-Toledo Ltd
The Mettler Toledo M800 is a multichannel, multiparameter analytical transmitter line. The series operates with Intelligent Sensor Management (ISM) sensors for pH/ORP, conductivity/resistivity, oxygen (dissolved as well as gas) and ozone. Up to four channels are available for measurement of any combination of the above parameters, plus inputs for flow.
Vega WeighTrac radiation-based belt weigher
03 November, 2011 | Supplied by: VEGA Australia Pty Ltd
WeighTrac is a radiation-based sensor for precise determination of the feed rate of bulk solids. It measures contactlessly with the help of gamma radiation and is suitable for mass flow measurement on conveyers. Its frame construction allows simple installation and retrofit.
Emerson Process Management FloBoss S600+ panel-mounted fiscal flow computer
30 October, 2011 | Supplied by: http://www2.emersonprocess.com/en-US/brands/remote/liquids_flow_computers/S600/Pages/S600.aspx
The FloBoss S600+ is a panel-mounted fiscal flow computer designed specifically for hydrocarbon liquid and gas measurement where versatility and accuracy are high priorities. It allows multistream, multistation applications to be configured for simultaneous metering of gas, wet gas, crude oil, refined products, LPG and NGL.
Katronic KATflow clamp-on ultrasonic flowmeters
20 October, 2011 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The Katronic KATflow clamp-on ultrasonic flowmeters work on the transit-time method. This is based on the principle that sound waves travelling with the flow will move faster than those travelling against it. The resulting difference in transit time is directly proportional to the flow velocity of the liquid and consequently to the volumetric flow rate.
FiberSensing FS 6500 single-axis fibre Bragg grating accelerometer
05 October, 2011 | Supplied by: Bestech Australia Pty Ltd
The FS 6500 single-axis fibre Bragg grating (FBG) accelerometer from FiberSensing is a fibre-optic version of the conventional accelerometer. Completely passive, with an intrinsically safe design, it offers inherent insensitivity to environmental-induced noise. The device is suitable for applications requiring the measurement of low frequency and small amplitude accelerations.
ICP Electronics I-87017ZW, 10/20-channel analog input module
29 September, 2011 | Supplied by: ICP Electronics Australia
ICP Electronics has released the I-87017ZW, an analog input module that includes 10 differential or 20 single-ended analog input channels. It provides a programmable input range on all analog inputs.
Yokogawa YTMX580 multi-input temperature transmitter
28 September, 2011 | Supplied by: Yokogawa Australia Pty Ltd
The YTMX580 multi-input temperature transmitter is based on the ISA100.11a industrial automation wireless communication standard and features eight analog input channels.
Deltaflux orifice flowmeter
24 September, 2011 | Supplied by: Duff & Macintosh
The Deltaflux orifice flowmeter is designed for measuring gas and liquid flows and suitable for high flow rate measurement and control in process flows, water treatment and gas furnace applications.
