Factory automation

Elap WDS pull-wire absolute encoder with fieldbus

02 July, 2012 | Supplied by: Motion Technologies Pty Ltd

The Elap WDS absolute multiturn pull-wire encoder features Profibus, CANopen or SSI outputs.


ABB IRB120T robot

29 June, 2012 | Supplied by: ABB Australia Pty Ltd

The IRB120T is a variant of the IRB120 robot that reduces cycle times by up to 25%.


Allen-Bradley 900 kW PowerFlex 755 AC drives

28 June, 2012 | Supplied by: Rockwell Automation Australia

Rockwell Automation has extended the power range of its Allen-Bradley PowerFlex 755 AC drives to 900 kW and added 600/690 V ratings.


RTA ADW series stepper drives

26 June, 2012 | Supplied by: Automated Motion Systems Pty Ltd

The ADW series stepper drives from RTA have an analog speed control input instead of traditional step and direction signals. They are designed for variable speed applications rather than position control and are suitable for small conveyors and feed-rate control in machines.


MIT researchers develop robotic assistants for factory workers

18 June, 2012

Wish you had a robot to help with repetitive tasks at work? Researchers at MIT are working on it.


Telemecanique XUY fully integrated roller sensor

18 June, 2012 | Supplied by: Schneider Electric

The Telemecanique XUY fully integrated roller sensor uses a multi-beam photoelectric sensor across the width of the conveyor, and is easily installed between the conveyor rollers.


Evaluating actuators for food and beverage applications

15 June, 2012 by Aaron Dietrich, Tolomatic, Inc* | Supplied by: Pneumatic Products

Materials, design, fabrication and maintenance affect actuator performance and compliance with food safety guidelines.


Sick AFS60 single-turn and AFM60 EtherNet/IP multi-turn encoders

14 June, 2012 | Supplied by: SICK Pty Ltd

The AFS60 EtherNet/IP single-turn encoder and the AFM60 EtherNet/IP multi-turn encoder provide comprehensive diagnostic capabilities and the integrated transmission function for rotary axes.


IEC Standard 61131: the benchmark for industrial controllers, Part 1

13 June, 2012 by Harry Mulder, Engineering Manager, Omron Electronics | Supplied by: Omron Electronics Pty Ltd

There can be little doubting the profound effect the IEC 61131 suite of standards has had on industrial controller product offerings over the last 25 years. Virtually all PLC vendors have adopted if not sections of the standard, then at least some concepts or its general philosophy.


Allen-Bradley 1715 redundant I/O platform

13 June, 2012 | Supplied by: Rockwell Automation Australia

Rockwell Automation’s 1715 redundant I/O platform requires no user programming code or add-on instructions, special wiring or additional hardware to operate. It supports multiple configurations and applications in standard and harsh environments.


Elmo analog servo drives

12 June, 2012 | Supplied by: Motion Technologies Pty Ltd

Elmo’s analog servo drives use a low-voltage DC input and are built to military standards for extreme environmental conditions.


Sick TBS temperature switch

12 June, 2012 | Supplied by: SICK Pty Ltd

The Sick TBS temperature switch is designed for the monitoring the temperature of operating fluids such as hydraulic oil, lubricants or cooling water.


Motrona BY340/BY641 variable speed drive synchronising units

05 June, 2012 | Supplied by: Plant Control & Automation

The Motrona BY340/BY641 variable speed drive synchronising units are suitable to operate as electronic synchronous controllers with speed-variable drives of any kind and any size, provided they dispose of an analog input to set the speed. The operation is based on a master/slave principle.


Sparkling clean and easy to swallow

30 May, 2012 | Supplied by: Siemens Ltd

A French pharmaceutical laboratory chooses Simatic control technology to improve cleanliness, increase production efficiency and win over hesitant operators.


maxon motor GP 26 A planetary gearhead

27 May, 2012 | Supplied by: maxon motor Australia Pty Ltd

The GP 26 A gearhead is part of a modular system and is available as one-stage to three-stage versions, with nine different reduction ratios, from 5.2:1 up to 236:1.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd