Micro-Epsilon non-contact bore measuring system
19 November, 2010 byMicro-Epsilon has developed an easy-to-use measuring system for acquiring the wear in the rear holes of extruder machines. This is done by measuring the internal diameter of drilled holes in the housings of double worm extruders using the idiamCONTROL system. The instrument has been designed for checking bore diameters by using non-contact capacitive displacement sensors.
SI Instruments mini TehloTest bottle-capping force tester
29 October, 2010 byThe mini TehloTest can be used for measuring head load force in capping machines. The wireless edition of the head load tester is now available in a miniaturised size suitable for small bottles, at 42 mm in diameter and 101 mm tall.
Casio Exilim Ex-F1 high-speed camera and lighting kit
28 October, 2010TechRentals has the Casio Exilim Ex-F1 high-speed camera and lighting kit available for rent.
Dwyer Model SM-100 digital sound meter
14 October, 2010 byThe Model SM-100 digital sound meter is designed for measuring noise levels from 30 to 130 dB with accuracy of ±1.5 dB. The meter has a frequency of 31.5 Hz to 8 kHz, three different dB ranges, and a 12.5 mm condenser microphone. It has two frequency weightings - the A weighting ranges from 30 to 130 dB, while the C weighting ranges from 35 to 130 dB.
Hart 9150 thermocouple furnace
11 October, 2010Available to rent, the Hart 9150 thermocouple furnace can be used to check industrial thermocouples and RTD temperature probes up to 1200°C.
Fluke unites calibration group, acquires Russka and Pressurements from GE
28 September, 2010Fluke Corporation is consolidating its six calibration product lines under a single logo - Fluke Calibration.
Circutor CVM-NRG 96 three-phase power analyser
23 August, 2010 byThe Circutor CVM-NRG 96 is a three-phase power panel analyser that displays and transmits all electrical parameters metered or calculated. It is suitable for supporting utility and commercial metering, power generation sites and campuses, sub-metering, load studies and voltage recording, as well as being an all-in-one analog meter replacement.
WIKA CPH6600 handheld pressure indicator and calibrator
06 August, 2010 byThe CPH6600 is a handheld pressure indicator and calibrator with an integrated pump. Since an external hand pump is not required, calibration tasks can now be carried out easier and quicker. The CPH6600 generates pressures of up to 10 bar with an integrated electrical pump, and manually up to 20 bar is possible. Accuracy is ±0.025% FS.
Hart Scientific 9141 dry block calibrator
02 August, 2010The Hart Scientific 9141 dry block calibrator is now available to rent.
Olympus iPLEX MX II Videoscope
29 July, 2010Available to rent, the Olympus iPLEX MX II Videoscope is used for identifying defects in hard-to-reach spaces. The tough, flexible insertion tube allows greater manoeuvrability while remaining crush resistant.
Hart Scientific 9141 dry block calibrator
28 July, 2010The Hart Scientific 9141 dry block calibrator is now available to rent.
Fluke Compass for Pressure 3.0 software
26 July, 2010 byThe Compass for Pressure 3.0 software helps calibration professionals organise and accelerate the task of calibrating pressure devices.
Hart Scientific 1594A and 1595A Super-Thermometers
26 July, 2010The 1594A/1595A Super-Thermometers from Hart Scientific are designed to combine accuracy, value and innovative features for calibration of SPRTs, PRTs and thermistors.
BSWA308 sound level meter
20 July, 2010 byThe BSWA308 sound level meter complies with the IEC61672 international standards and features an industrially designed housing. The measurement microphone, which is supported by an ICCP (IEPE) preamplifier, is equipped with a TNC connector so that it can be operated attached or detached from the main processing unit via a microphone extension cable.
Fluke EtherScope Series II Network Assistant
05 July, 2010 byAvailable to rent, the Fluke EtherScope Series II Network Assistant is a handheld portable network troubleshooter for 10/100/gigabit copper, fibre and wireless LANs. It also combines tools that help LAN and Wi-Fi network installers quickly solve the wide range of problems they encounter, to enable them to complete projects on time and within budget.
