Boiler trace analysis — the key for cutting production costs
24 March, 2016Corroded steam boilers regularly lead to large profit losses in the production process. Inefficient system productivity, unplanned downtime, intensive maintenance and a shorter life cycle all eat away at your potential revenue.
Fluke ScopeMeter 120B Series industrial handheld oscilloscope
09 March, 2016The Fluke ScopeMeter 120B Series industrial handheld oscilloscope is designed to address the challenges of troubleshooting complex industrial machinery with features that improve the speed and efficiency of troubleshooting complex electromechanical systems.
Olympus i-SPEED LT video camera
08 March, 2016The Olympus i-SPEED LT video camera gives valuable insight into production lines and any intermittent problems they might have.
Electro-Chemical Devices HCA1 Portable Colorimetric Chlorine Test Kit
02 March, 2016The HCA1 Portable Colorimetric Chlorine Test Kit is suitable for testing free and total chlorine in drinking water, wastewater, environmental waters, cooling towers and rinse waters in the food and beverage industry.
ALL-TEST PRO 5 motor circuit analyser
01 March, 2016Motor circuit analysis can be utilised for testing motors prior to installation or storage, for fault identification and troubleshooting, for analysing winding condition over time through trending, and for predictive maintenance.
Michell Instruments HygroCal100 humidity verifier
15 February, 2016The HygroCal100 humidity verifier provides a practical option for companies that are not able to invest in a full humidity calibration laboratory to verify their humidity probes in-house.
Electro-Chemical Devices HCA1 Portable Colorimetric Chlorine Test Kit
27 January, 2016The HCA1 Portable Colorimetric Chlorine Test Kit is suitable for testing free and total chlorine in drinking water, wastewater, environmental waters, cooling towers and rinse waters in the food and beverage industry.
Gloi ALiSENSOR level and flatness testing system
19 January, 2016The Gloi ALiSENSOR is a precision level measurement system that is designed for complex geometrical measurements of high accuracy.
Michell Instruments HygroCal100 verification system for humidity probes
25 November, 2015Weighing just 3.2 kg and with a battery life of up to 8 h, the HygroCal100 verification system for humidity probes is designed with portability in mind.
Michell Instruments S8000 Integrale chilled mirror hygrometer
04 November, 2015Michell Instruments has redesigned its S8000 Integrale chilled mirror hygrometer to take advantage of improvements in technology since its introduction in 2007.
Fluke PRV240 proving unit
02 November, 2015The Fluke PRV240 proving unit is designed to reduce the risk of shock and arc flash by providing a known voltage in a controlled, low-current state in accordance with safe work practices.
FLIR CM55/57 flexible clamp meters
30 October, 2015The CM55/57 flexible clamp meters are designed for electrical inspections, making it easier to take measurements around multiple conductors, crowded panels, tight switch gears, large bus bars and wire bundles.
Fluke 9144 dry block calibrator
26 October, 2015The Fluke 9144 dry block calibrator is suitable for comparison calibrations, transmitter loop calibrations and simple checks of thermocouple sensors.
Olympus Series C entry-level videoscope
20 October, 2015The Series C entry-level videoscope is designed to provide quick and easy inspections in difficult-to-reach areas.
Olympus IPLEX RT videoscope
05 October, 2015The Olympus IPLEX RT is designed for the visual inspection of heat exchangers, turbines, gearboxes, automotive parts, aircraft and other industrial machinery.
