Equipment > Switches & indicators

Banner Engineering EZ-Light K50 beacon light

27 June, 2011 by

The EZ-Light K50 beacon light from Banner Engineering provides intense levels of light output from all directions and is designed to be a solution where high brightness is needed, including both indoor and outdoor environments. Due to its high visibility, the K50 is a suitable lighting solution for a wide range of applications, including general status indication such as gate entrances, and for areas with high levels of ambient light that would normally wash out a standard indicator light.

C&K Components RAFIX 22 FS Series universal quick-connect switches

21 March, 2011 by

The RAFIX 22 FS Series of low-profile, universal quick-connect switches from C&K Components support a modular installation concept, allowing the switches to be plugged into the panel and locked firmly into place, simplifying both assembly and maintenance.

Banner Engineering Ez-Light K80 call light

29 October, 2010 by

Banner Engineering has introduced the Ez-Light K80 call light, designed to optimise productivity in flexible manufacturing environments. The call light is a simple solution for keeping parts bins stocked and the assembly line productive: it emits a flashing red signal from a large 50 mm dome - visible from 180 degrees - to notify stocking personnel when parts bin supplies must be replenished. This notification ensures parts bins are refilled before supplies are gone, allowing assembly and manufacturing line operators to sustain production.

Dwyer Series VPI rotary valve position indicators

17 August, 2010 by

Series VPI rotary valve position indicators are compact yet rugged for confined and severe locations. They are designed to offer visual position indication as well as two internal limit switches. The spring-loaded splined cams require no tools for adjustment. The NEMA 6 (IP67) rating ensures protection against the ingress of liquid and debris.

Noshok 200 and 300 Series mechanical switches upgraded

22 July, 2010 by

Noshok has upgraded the 200 and 300 Series mechanical switches to provide increased versatility, along with improved repeatability and contact ratings.

Moflash Signalling 80 series compact Xenon and LED beacons

22 June, 2010 by

NHP has released a range of compact Xenon and LED beacons from Moflash Signalling.

Tower lights

09 June, 2009 by

The EZ-Light TL50 tower lights by Banner Engineering are designed to deliver highly visible operator guidance and indication of equipment status. Displaying up to five colours in one tower and allowing multiple colours to be lit simultaneously, these preassembled and preconfigured multi-segment indicators replace conventional stack lights, which often require time-consuming assembly and complex wiring. In addition, models featuring audible alert with adjustable intensity are available for applications requiring sound indication.

Light towers

09 June, 2009 by

EMA LED multi-layer light towers are designed to monitor status and alarm conditions. They are available in 70 mm diameter and are easier to install, due to the modular twist-and-lock design. Each light element can be mounted or replaced without the need for any tools. Each of the light modules can be user selectable for either continuous or flashing, which reduces inventory.

Segmented indicator lights

01 January, 2009

Banner Engineering’s Ez-Light segmented indicator lights are designed for operator guidance and indication of equipment status.

Audible indicator lights

01 November, 2008

Banner Engineering’s Ez-Light audible indicator lights are designed for operator guidance and indication of equipment status. These rugged indicators feature multi-coloured, long-lasting LEDs, deliver a convenient solution for displaying the status of remote and inaccessible sensors, and minimise the need for costly and inconvenient bulb replacements.

Integrated switch

15 July, 2003

ERNI has extended the Bus-Interface Connector family with the ERbic MAX CAN switch.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd