R. STAHL SolConeX explosion-protected plugs and sockets
23 October, 2020Fully compatible with older versions, the SolConeX range can be used in Zones 1, 2, 21 and 22, and is suitable for all international wiring systems.
Connectivity design tips and considerations for harsh environments
01 October, 2020When choosing a connectivity solution for harsh environments, look for products that will result in less downtime and more cost savings.
ILME MIXO CX 36 IF/M crimp insert
10 August, 2020The ILME MIXO series of modular connector units has been updated with the addition of the CX 36 IF/M crimp insert.
ILME CQ4F/M 03/2 compact inserts
30 June, 2020The design of the ILME CQ4F/M 03/2 compact inserts allows a combination of power and brake contacts specifically developed for new-generation robots.
WAGO Gelbox moisture protection enclosure
24 June, 2020The WAGO Gelbox is designed to protect WAGO splicing connectors from moisture and humidity, and is able to achieve IPX8 levels of moisture protection.
Ilme CR BDSH terminal bridges
02 June, 2020Installed on the connectors of the Ilme CDSH series, the CR BDSH bridges reduce the number of connections inside a control panel.
Weidmüller maxGUARD resettable circuit breaker terminals
29 May, 2020The maxGUARD series of resettable electronic circuit breaker terminals is a modular system that combines both electronic overload protection and 24 VDC distribution.
Ilme CX 9/42 modular connectors
06 May, 2020The Ilme CX series of combined inserts has been expanded with the CX 9/42, an all-in-one solution combining power and signal connections.
Ilme 21.21 Series compact enclosures
21 April, 2020Developed for large-diameter cables using an M25 cable entry, the latest hoods are a suitable solution for the robotics and automation sectors.
ilme SIMPLEX self-closing connector cover
24 March, 2020The ilme SIMPLEX self-closing cover is designed to protect the connector, granting an IP65 degree of protection when mated and locked.
ILME HNM series modular connectors
12 March, 2020The ILME HNM (High Number of Matings) series has been expanded with the RX 12/2 combined inserts.
igus 3D printing filaments
04 February, 2020Treotham has announced that igus 3D printing filaments are now available in Australia from Imaginables.
ILME MIXO 42-pole modular insert
13 November, 2019The ILME MIXO series has been expanded with a high-density, 42-pole modular insert, the CX 42 DF/DM.
Enable the food factory of the future
01 November, 2019Make connectivity smarter with industry leading smart factory solutions from RS Components & TE Connectivity.
ilme MKAS IVG20 bulkhead mount housings
16 September, 2019The MKAS IVG20 zinc alloy bulkhead mounting housings provide full shielding not only outside but also inside the cabinet.
