Dwyer Series PFT paddlewheel flow sensor
12 May, 2010 | Dwyer Omega (Aust) Pty Ltd
The Series PFT is a paddlewheel flow sensor used to monitor liquid flow rates in pipes from 38 mm to 1 m with one size-adjustable sensor.
National Instruments backplanes for PXI/CompactPCI and PXI Express
06 May, 2010 | National Instruments Aust Pty Ltd
National Instruments now offers board-level backplanes from its PXI/CompactPCI and PXI Express chassis for OEMs to use in applications ranging from aerospace/defence to industrial embedded control. Engineers and scientists can use the PXI/CompactPCI backplanes to create custom, rugged applications that meet their unique form factor needs or environmental specifications.
Redpost RPU-353 pasteurisation temperature recorder
06 May, 2010 | AMS Instrumentation & Calibration Pty Ltd
The RPU-353 is a special-purpose electronic temperature recorder designed to monitor the tunnel pasteurisation process. It has inputs for two temperature probes for monitoring spray water and product temperature together with package internal pressure.
Moxa CSM-200 ethernet-to-fibre modules for NRack System
06 May, 2010 | CrispTech Pty Ltd
Moxa has released the CSM-200 series of slide-in ethernet-to-fibre modules for the NRack System. The modules provide media conversion from 10/100baseT(X) to 100baseFX (SC or ST connector) for fibre-optic transmission up to 40 km. For secure remote failure detection of connected devices, the CSM-200 series supports the TS-1000 protocol. Via a DIP switch, users can switch between store-and-forward mode for high-performance throughput and cut-through mode for real-time response. The CSM-200 series also features hot swapping, so modules can be installed or removed without interrupting the entire system.
Redpost RPU-352 pasteurisation temperature recorder
06 May, 2010 | AMS Instrumentation & Calibration Pty Ltd
The RPU-352 is a special-purpose electronic temperature recorder designed to monitor the tunnel pasteurisation process. It has inputs for two temperature probes so that the conditions inside and outside the package can be measured at the same time.
FCI MT91 multipoint gas mass flowmeter
06 May, 2010 | AMS Instrumentation & Calibration Pty Ltd
The MT91 multipoint gas mass flowmeter from Fluid Components International (FCI) has been tested by TÜV Rheinland Germany and found to comply to EN 15267-1: 2009, EN 15267-2: 2009, EN 15267-3: 2007 and EN 14181: 2004.
Hydac screw pumps
06 May, 2010 | HYDAC International
The Hydac screw pumps are suitable for industrial applications where high reliability and low noise are required. They produce low vibration and are optionally coupled with electrical motors.
Interworld Electronics QSU2-540 industrial communications module
06 May, 2010 | Interworld Electronics and Computer Industries
The QSU2-540 industrial communications module has four independent serial ports with each port able to support RS232, RS422 or RS485 protocols.
Fluke TiR32 thermal image camera
06 May, 2010 | TechRentals
The Fluke TiR32 thermal image camera can scan large areas quickly to detect problems or the extent of any damaged caused. The handheld instrument gives the clear, crisp images needed to find problems quickly with its 320 x 240 sensor and it is available to rent.
Festo MS6-LRP-PO precision pressure regulator
28 April, 2010 | Festo Pty Ltd
The MS6-LRP-PO precision pressure regulator from Festo is suitable for use in the automotive industry and can now be used in balancer applications.
FastLinc FLC820G IEEE 802.11 ethernet wireless modems
28 April, 2010 | Wired & Wireless Solutions International
Wired & Wireless has released the FastLinc range of IEEE 802.11 industrial ethernet wireless modems using 2.4 GHz direct sequence technology. With an output power much higher than commercial 802.11b/g products and with a rugged design, the FastLinc range is suitable for industrial SCADA and factory automation systems.
Hirschmann Eagle Tofino security switches
28 April, 2010 | Belden Australia Pty Ltd
Belden has announced a range of zone-level security switches that are designed to protect control systems against network problems and cyber threats. The Hirschmann Eagle Tofino range combines a security appliance with a collection of software modules that are intended to together provide practical and effective industrial network security that is simple to implement and does not require plant shutdowns.
Eltra precision rectilinear potentiometers
28 April, 2010 | Automated Motion Systems Pty Ltd
The Automated Motion Systems Eltra precision rectilinear potentiometers are suitable for automation applications where analog position feedback is required in linear motion control systems. They are commonly used with pneumatic, electric or hydraulic actuators.
Switchcraft sealed, locking power jacks and plugs
28 April, 2010 | Clarke & Severn Electronic Solutions
Switchcraft has added sealed, locking power jacks and plugs to its range of DC connectors.
Control Microsystems SCADAPack ProductionPLUS
28 April, 2010 | Control Microsystems
Control Microsystems has announced the release of SCADAPack ProductionPLUS, a pad-wide optimisation solution combining EFM and plunger lift for 30+ wells per pad. It leverages the functionality and flexibility of the company’s product suite to provide gas operators with an efficient wireless or wired sensor to enterprise application.
