Michell Instruments Easidew I.S. intrinsically safe dew-point transmitter
07 February, 2013 | AMS Instrumentation & Calibration Pty LtdThe Easidew I.S. intrinsically safe dew-point transmitter has been upgraded to enhance its performance with additional process connections and extended hazardous area certification.
Yokogawa Rotamass LR Coriolis mass flow meter
07 February, 2013 | Yokogawa Australia Pty LtdThe Rotamass LR Coriolis mass flow meter is designed to measure both liquids and gases, and has a dual bent tube that decouples the core measuring element from process vibration.
IEI Technology PPC-5150A-H61 series 15-19″ industrial panel PC
07 February, 2013 | ICP Electronics AustraliaThe PPC-5150A-H61 series industrial panel PC is designed with a heavy-duty, rust-resistant chassis and an aluminium IP66-compliant front panel, and has an expanded operating temperature range of -20 to +60°C.
Sensorex CLD500 chlorine dioxide sensors
07 February, 2013 | Envirosensors Pty LtdSensorex’s CLD500 chlorine dioxide sensors use advanced amperometric measurement technology to provide highly accurate monitoring of chlorine dioxide in disinfection applications.
Carl Zeiss Corona Plus VIS-NIR spectrometers range
06 February, 2013 | ZEISS GroupThe Corona Plus range of spectrometers can be used for the measurement of various optical properties such as reflection, transmission, colour and coating thickness of transparent samples and coatings.
Phoenix Contact FL Isolator 100-M12
06 February, 2013 | Phoenix Contact Pty LtdThe FL Isolator 100-M12 is a galvanic separator intended for heavy-duty use in all industrial ethernet applications using M12 connection technology.
Michell Instruments MDM300 portable sample panel
06 February, 2013 | AMS Instrumentation & Calibration Pty LtdThe MDM300 sample panel is a fully functioning portable sample system that provides both flow control and filtration, but is also compact and light enough to carry.
Spirax Sarco SP400 and SP500 valve positioners
05 February, 2013 | Spirax Sarco Pty LtdThe Spirax Sarco SP400 and SP500 valve positioners are claimed to be the most energy-efficient digital electro-pneumatic valve positioners available, based on steady state air consumption.
Secomea SiteManager models 1439 and 3439 remote access solutions
05 February, 2013 | Daanet Pty LtdSecomea has expanded the range of 3G SiteManager units to include models 1439 and 3439 with four LAN ethernet ports.
Turck individually configurable RFID handheld readers for HF and UHF applications
04 February, 2013 | Turck Australia Pty LtdTurck is expanding its range of RFID handheld devices with software that can be specifically tailored to the requirements of individual users.
Beamex MCS200 modular calibration system
04 February, 2013 | AMS Instrumentation & Calibration Pty LtdBeamex has introduced a modular test and calibration system for workshops and laboratories, offering a safe and ergonomic solution for the calibration and maintenance of process instruments.
Banner Engineering surface flush mount E-stop range
04 February, 2013 | Micromax Pty LtdThe 40 mm emergency stop buttons are designed to mount on a wall or other flat surface without disassembling or individual wiring, and come in various locking and illumination configurations.
PCA Encoder Laboratory shaft encoder tester
04 February, 2013 | Plant Control & AutomationThe Encoder Laboratory is designed to test and simulate all aspects of an incremental shaft encoder, or any other instrument which produces a square wave output signal, such as linear encoders and flow meters.
Dwyer Series UTC ultrasonic liquid level transmitter controller
01 February, 2013 | Dwyer Omega (Aust) Pty LtdThe Series UTC ultrasonic liquid transmitter controller provides reliable, accurate, non-contact measurement of liquid level and open channel flow even under extremely harsh conditions.
Phoenix Contact HC-ALU aluminium housing for outdoor use
01 February, 2013 | Phoenix Contact Pty LtdThis aluminium profile is horizontally split for easy assembly of components and fully fitted PCBs, and the front surface has a 2 mm recess for flush-fit insertion of labels or membrane keyboards.
