Directory Search



Omron Electronics Pty Ltd

Omron Electronics supply a range of PLC platforms, motion controllers, sensors, switches, relays, timers, counters, temperature and level controllers and protective devices. All products are designed and built to the highest international standards to the business of manufacturing even faster and more efficient.


Website: www.omron.com.au
Email: sales-au@ap.omron.com
Phone: 1300 766 766
Fax: 1300 434 682
Address:
71 Epping Road , North Ryde NSW 2113 (Directions)

Products

Omron i4L SCARA robot

Omron says its i4L SCARA robot is capable of high-speed, high-precision motion with payloads up to 5 kg.

Omron 3G3MX2 series multifunction compact inverter

The 3G3MX2 series multifunction inverter supports both induction and permanent magnet motors, and includes PID control and built-in safety.

Omron E8PC pressure sensors with temperature detection

Omron E8PC pressure sensors can detect signs of abnormalities in cooling water and hydraulic oil by simultaneous measurement of pressure and temperature.

Omron E8FC series flow sensor

Omron's E8FC series flow sensor introduces dual parameter sensing, where a single meter measures the temperature of a liquid, as well as its flow.

Omron LD-250 heavy-duty autonomous mobile robot

The LD-250 autonomous mobile robot (AMR) offers a payload capacity of 250 kg and can safely navigate without the use of floor magnets or wall-mounted beacons.

Omron 1S servo range

Omron has released additional models in its 1S servo range.

Omron FHV7 smart camera

The FHV7 smart camera for advanced vision inspections on high-mix production lines features a multicolour light and high-resolution image sensor.

Omron S8VK-X series power supplies

The S8VK-X series power supplies are compatible with EtherNet/IP and Modbus TCP fieldbus systems.

Omron K6CM motor condition monitors

Omron has released a series of motor condition monitoring devices as part of a range of IoT components.

Omron NX Series safety network controller

Omron has released the latest edition of its NX Series safety network controller, which support both the CIP Safety and Safety over EtherCAT (FSoE) protocols.

Omron MobilePlanner Tablet Edition mobile robot control

Omron has released a tablet edition of its MobilePlanner control centre software for mobile robots.

Omron NX1 series automation controllers

Based on, and compatible with, Omron's SYSMAC platform, the NX1 series has attained OPC UA certification and provides dual EtherNet/IP and EtherCAT ports.

Omron S8VK-G single-phase switchmode power supplies

The Omron S8VK-G single-phase switchmode power supply conforms to UL Class I Division 2 rating and has a universal voltage input of 100 to 240 VAC.

Omron KM-N2 and KM-N3 power monitors

Omron's KM-N2 and KM-N3 power monitors offer a choice of both panel-mounted installation and DIN rail mounting for control panels.

Omron MK-Z fibre laser markers

Omron's MX-Z fibre laser markers are designed for deep or shallow engraving on metals and fine mark processing on plastics, including objects with sloped, curved, conical or sphere-like surfaces.

Omron E5CD and E5ED digital temperature controllers

Omron's E5CD/E5ED digital temperature controllers are adaptive, using artificial intelligence to adjust PID loop parameters automatically.

Omron S8BA series DC-DC UPS

Omron's S8BA series of DC-DC uninterruptible power supplies is designed to produce a steady 24 VDC output for industrial computers and controllers. It is designed to work with Omron's compact S8VK-S series switch-mode power supply.

Omron NX1P machine controller

The NX1P machine controller features advanced motion control, with built-in EtherNet/IP and EtherCAT ports, and a fast execution time of 3.3 ns.

Omron Delta-3 robot

The Delta-3 robot from Omron is designed to achieve up to 200 cycles/min and can be synchronised with multiple conveyors to perform on-the-fly pick-and-place operations.

Omron G5 Lite servos

Based on the G5 series, the Omron G5 Lite servos represents a cut-down version, with a number of advanced features removed to reduce cost.

Omron CP1L-E micro servo controller

Built on the CP1L platform, the Omron CP1L-E micro servo controller offers an ethernet port, two analog inputs and pulse I/O as standard features.

Omron R88D-L series linear servos

The R88D-L series of linear servos encompasses a large range of linear products with multiple options and will extend the range of the Omron G5 series servos to include linear applications.

Omron FQ2 vision sensor system

The FQ2 can be used for pattern recognition, batch code and expire date confirmation, size measurement, counting, colour confirmation, barcode reading (1D, 2D and pharmacode) and OCR.

Omron Electronics CP1L-E series micro servo controller

Built on the CP1L platform, the CP1L-E now offers an ethernet port, two analog inputs and pulse I/O as standard features.

Omron Electronics CJ1W-NC4 series position control modules for CJ1 and CJ2 PLCs

Each CJ1W NC4 card can control two or four axes, using either line driver or open collector output, and can produce output pulses at up to 4 Mbps.

Omron G5 Lite low-cost servos

Based on the G5 series, the G5 Lite servos from Omron are a cut-down version, with a number of advanced features removed to reduce cost.

Omron ZX2 laser sensor

Omron’s ZX2 laser sensor has a dynamic range of 2 million times, and is designed to provide stable measurements for any colour or surface condition, including metals, substrates, elastomers and transparent materials, using Omron’s HSDR-CMOS (high speed and dynamic range) image sensor and a stepless laser power adjustment algorithm.

Omron Type FQ Series vision sensor

Omron’s Type FQ Series vision sensor incorporates full-blown image processing capabilities in a palm-size footprint.

Omron FZ Lite vision sensor

The Omron FZ Lite vision sensor provides high image quality and clarity with a colour resolution of 16.7 million colours. Power LEDs, high dynamic range, polarisation and halation filters enable stable inspections on difficult surfaces.

Omron Trajexia modular motion system

Trajexia is a stand-alone modular motion system that is designed to allow flexibility and scalability.

Omron CJ2M family of PLC CPUs

Omron recently released its CJ2M family of PLC CPUs. Evolving from the CJ1M family, the CJ2M improves performance, features and functionality. Smaller models allow an affordable entry into advanced automation, while models at the high end enable scalable solutions.

Omron F3S-TGR-N stainless steel coded non-contact switches

The F3S-TGR-N stainless steel coded non-contact switches have been introduced with the food processing industry in mind. The switches are used to interlock hinge, sliding or removable guard doors.

Omron Electronics 3G3MX2 series mid-range micro drives

The Omron 3G3MX2 series mid-range micro drives are available in 240 and 480 V versions, and in power ranges from 0.1 to 15 kW. With sensorless vector control functionality and built-in safety inputs, the 3G3MX2 is suitable for constant torque conveyor and mixing applications and variable torque fans and pumps.

Omron FZ3-900 series vision system

The FZ3-900 series vision system provides a dual CPU colour vision sensor that is designed to make it possible to achieve high-speed multiline inspection with one controller. The system has a high dynamic range, a 5 megapixel camera and true colour resolution through Omron’s Advanced Real Colour Sensing (ARCS) engine, which can capture and process 16.77 million colours.

Ethernet/IP safety controller

The NE1A is a programmable safety controller using function block- programming logic, which allows it to be used in a simple stand-alone application as well as in a full-scale safety solution. The controller is programmed via the built-in USB port, contains 16 safety inputs, eight transistor safety outputs and four test pulse outputs. The NE1A also has DeviceNet and ethernet/IP as onboard communication protocols.

Image processing system

The ZFX-CD smart vision sensor is a total image processing system that includes a camera with an integrated light source and an image processing unit, and has 1D/2D and pharmacode reading capability.

Stainless steel photoelectric sensor

Constructed with food industry-grade materials, the E3Z-M has been designed so that the detergents and disinfectants used during cleaning do not destroy the sensor — unlike standard plastic and metal types.

High-temperature proximity sensor

In heat treatment or cooking applications, hot steam or heated metal parts may damage standard sensors. The E2E-H heat-resistant inductive sensor provides both temperature resistance up to 120 °C and high detergent and water resistance.

PLC ethernet module

Omron has recently introduced the CP1W-CIF41, an add-on ethernet option board for CP1 PLCs, enabling communications to these micro PLCs over ethernet networks, boosting their flexibility and usefulness.

Stainless steel photoelectric sensor

Constructed with food industry-grade materials, the E3Z-M has been designed so that the detergents and disinfectants used during cleaning do not destroy the sensor — unlike standard plastic and metal types.

High-temperature proximity sensor

In heat treatment or cooking applications, hot steam or heated metal parts may damage standard sensors. The E2E-H heat-resistant inductive sensor provides both temperature resistance up to 120 °C and high detergent and water resistance.

PLC data access module

Omron Electronics has released the Data Access Module (DAM01) — a small user interface for its micro PLC range. Fitting neatly into a communication board slot, the DAM01 empowers the user with knowledge of the process the PLC is controlling.

Micro PLCs

Omron Electronics has increased their offering of micro PLCs by adding both 10 and 60 I/O CPUs to the CP1L range. Also, all six CPU types are now available with AC power source and transistor (NPN) output, offering additional flexibility to customers.

PLC data access module

Omron Electronics has released the Data Access Module (DAM01) — a small user interface for its micro PLC range. Fitting neatly into a communication board slot, the DAM01 empowers the user with knowledge of the process the PLC is controlling.

Colour vision sensor

The FZ3 colour vision sensor, providing true colour technology, high dynamic range and five million pixels resolution, is designed to make it possible to automate inspection of low-contrast colour objects at high speed with reliable results. Omron’s Advanced Real Color Sensing (ARCS) engine captures and processes 16.77 million colours, approaching human colour perception, and is claimed to outperform systems that use monochrome or false-colour contrast conversion and analysis methods.

Touch screen HMI

Omron Electronics has announced NS15 HMI. Measuring 15" diagonally across its colour touch screen, the NS15 offers a resolution of 1024 x 768 pixels, which is the equivalent of an XGA computer monitor. The unit itself is silver in colour and measures 405 x 304 mm.

Ethernet switching hubs

Omron Electronics has released the W4S1 series of industrial switching hubs. Switching hubs are a requirement for all ethernet networks with three or more nodes. In the initial release, three models are available, with either three or five ports.

HMI firmware

Omron Electronics has released firmware version 8 for its NS series HMIs. NS firmware v8 provides a host of features, including web serving, PictBridge and EtherNet/IP. The new CJ2H PLCs are now also supported, as are new drivers for Modbus-RTU and devices from other vendors.

EtherNet/IP modules

EtherNet/IP (industrial protocol) is a global standard for industrial communications using ethernet. Using the low-cost infrastructure offered by ethernet, EtherNet/IP ensures customers have a cost-effective, high-performance network.

Integrated automation software

Omron Electronics has released version 3 of CX-One. Running on Windows Vista and built-in Omron’s SmartPlatform technology, CX-One programs nearly all of Omron’s industrial components, including the latest PLCs, HMIs, networks, VSDs, servos and temperature controllers.

CJ2H PLC CPU

Omron Electronics has released the CJ2H PLC CPU. Using all the existing CJ1 cards and power supplies, the CJ2H allows users access to improvements in performance and technology while maintaining backward compatibility.

Safety controller

Omron's NE1A safety DeviceNet controller is claimed to be the world's first programmable safety controller with a built-in DeviceNet safety interface.

SmartSlice I/O for DeviceNet

The GRT1 series is a Smart Slice I/O system which allows up to 64 small input/output modules to be plugged into a single communications module.

ZFV vision sensor

Omron's ZFV vision sensor delivers real-time inspection in a sensor format with simple and quick set-up through an integrated LCD monitor. Optics and illumination are integrated in a single package. It consists of two separate components, a sensor head with an integrated light source and a controller.

Long-range RFID system

Omron Electronics' V690 series RFID tagging system uses radio frequency (RF) waves to read and write data to and from a tag to perform identification (ID) functions. The tags are usually mounted on a pallet, containing stock for logistics, production or other automation applications.

Digital temperature controller

The E5CN temperature controller has been enhanced with extra features. The new series has twice the previous model's input sampling speed and supports thermocouple/platinum resistance thermometer or analog input types in a different model.

Product dimension/weight control

Omron's ZX Smart sensor uses laser displacement technology to accurately measure the thickness of a continuously moving product. Using a scan time of just 150 µS, it can average up to 4096 different measurements and provides a series of outputs, including three digital judgments and linear analog. The ZX Smart sensors can achieve thickness measurements with resolutions of 0.25 µm.

PLC training consoles

Omron Electronics has developed a series of compact PLC training consoles based around the CJ1M series CPUs.

PLC training

Omron Electronics has developed a series of compact PLC training consoles based on the CJ1M series CPUs.

News

Omron announces 'robotic integrated controller'

The solution offers real-time synchronisation between all automation equipment, including robots, vision components, drives and safety equipment.

Omron offering virtual tours of its Automation Center

Showcase facility for factory automation technology aims to help find solutions for manufacturers using digital transformation to avoid the 'three Cs'.

Omron offers free e-learning options

The COVID-19 pandemic is forcing many people to work from home, which for some will present an outstanding opportunity for online learning.

Omron appoints new Managing Director

Omron has appointed a new Managing Director for its operations in the Oceania Region.

Omron event: Are your processes Industry 4.0-ready?

Next week in Sydney, Omron will host a breakfast seminar to discuss how to prepare your organisation for Industry 4.0.

Robots connected to the cloud to drive productivity

Visitors to the Microsoft Ignite conference in Sydney were given a taste of the future, with technology that is set to change the face of manufacturing.

Omron appoints new director for Oceania region

Omron Electronics Oceania has appointed a new director for its operations in the Oceania region.

Omron database connectivity seminar

Omron will be holding a training seminar on its NJ Database Functionality at its Brisbane office on Friday, 18 August.

Omron table tennis robot officially named world's 'first robot table tennis tutor'

Omron Electronics has announced that its table tennis robot FORPHEUS has been officially named the world's 'first robot table tennis tutor' by Guinness World Records.

Automation solutions seminar for the food processing and packaging industries

Omron will be holding a free BBQ breakfast seminar on the latest automation technologies for the food industry in New Lambton (Newcastle) on 7 September 2016.

Omron signs strategic partnership with leading automation solutions provider

Omron has signed a new partnership agreement with Alliance Automation to supply automation equipment over the next two years.

Omron signs automation deal with Visy

Omron has signed a new partnership agreement with Visy Automation to supply automation equipment over the next two years.

White Papers

How to start collecting big data in your production environment

More producers than ever are looking to amass big data for analysis. Details of solutions and actual implementations, however, are somewhat vague.

Categories

Brands

  • All content Copyright © 2022 Westwick-Farrow Pty Ltd