Directory Search



NHP Electrical Engineering Products Pty Ltd

NHP are specialists in industrial switchgear and automation solutions, offering a wide range of products to serve your process engineering needs.


Website: www.nhp.com.au
Email: mel-sales@nhp.com.au
Phone: 03 9429 2999
Fax: 03 9420 1075
Address:
PO Box 199 , Richmond VIC 3121 (Directions)

Products

Allen-Bradley GuardShield light curtains

The Allen-Bradley GuardShield light curtains include the CIP Safety over Ethernet module along with integrated laser alignment, muting, blanking and cascading.

Allen-Bradley Bulletin 1492-P terminal range

The Allen-Bradley Bulletin 1492-P terminal range features push-in actuators, enabling the easy insertion of cables.

NHP intrinsically safe signalling kits

NHP has announced a range of low-power, high-output, intrinsically safe signalling kits.

ProSoft Technology ICX35-HWC industrial cellular gateway

The ICX35-HWC industrial cellular gateway provides a communication solution for system integrators and OEMs that monitor devices in hard-to-reach spots.

NHP RL8 and RG8 power factor controllers

With an easy-to-use interface, the RL8 and RG8 offer plug-and-play accessory modules providing flexibility to meet any application requirement, with options from master/slave configurations to contactor or dynamic switching of capacitor banks.

Steute modular wireless push-buttons

Steute has released a range of push-button devices that are completely modular in design and provide more possibilities in interfacing through no need for wires or batteries.

Fibox ARCA polycarbonate enclosures

The Fibox ARCA range of polycarbonate enclosures is designed especially for use in harsh and demanding environments.

Proconect 3PV/3PX high-current connector range

With current ratings starting at 160 A with a maximum of 660 A at 3.3 kV, the 3PV/3PX also features IP67/IK10 ingress and impact protection.

Eldon Multiflex 316 stainless steel floor-standing enclosures

The Eldon stainless steel range of enclosures is suited for use in the food and pharmaceutical industries, outdoor applications and marine environments as well as in other applications requiring increased corrosion resistance.

Steute Xtreme ATEX/IECEx certified inductive sensors

Steute Xtreme inductive senosr are available in M8, M12, M18 and M30 sizes with a cable or plug-in connector, and are also available with IP68K or IP69K ratings and for temperatures of -40 to +120°C.

NHP 2013 Catalog

NHP has released its 2013 catalogue, as well as an App for iPhones and iPads.

Steute EEx ZS 73 SR series hazardous area belt drift switches

The Steute EEx ZS 73 SR series of hazardous-area belt drift switches can be used to monitor the alignment of conveyor belts and, depending on the application, can either be used to switch off the equipment or to provide automatic correction of the belt’s alignment should a misalignment occur.

Schaffner Sinusoidal FN5040/45 drive output filters

The Schaffner Sinusoidal FN5040/45 output filters are designed to ensure cooler and more reliable drives. As well as offering the capacity to prevent premature failures and expensive downtime, they are matched to the technical requirements of modern drive systems reducing the extra losses experienced in AC motors.

Moflash Signalling 80 series compact Xenon and LED beacons

NHP has released a range of compact Xenon and LED beacons from Moflash Signalling.

Eldon Multi-Flex floor-standing enclosures

The Multi-Flex range of floor-standing enclosures from Eldon is claimed to be one of the most technically advanced products available due to its design and extensive mounting possibilities that save installation time.

Wago 857 Series Jumplex transducer and relay modules

The Wago 857 Series Jumplex transducer and relay modules have a compact design, with 6.0 mm width, and can operate over a temperature range from -25 to 70°C.

Variable speed drives

NHP carries stock of the Santerno range of variable speed drives, which includes the Sinus Nano, Micro and Penta drives.

DOL starter

NHP-Stahl has introduced a DOL electrical motor starter, a combination of an 8265 (GUB) Ex d IIC aluminium enclosure and an 8146/5 Ex e IIC GRP control station enclosure.

Enclosures and termination catalogue

Spanning 300 pages-plus, the fully-illustrated first edition NHP enclosures and termination catalogue delivers a comprehensive guide to the broadest collection of enclosure and terminations products available in Australia. The catalogue features electrical housing and cabling solutions and accessories from Eldon, Fibox, Zanardo, Cosmotec, Stego, Iboco, Wago and Sprecher + Schuh, all exclusive to NHP.

Modular cabinet

Available in single or double door IP55 models, the MCS Multi-flex cabinet has fully modular capabilities that offer solutions for optimising space. Cabinets are quickly joined side by side, which is suitable for areas where access is restricted, such as high rise buildings and basements; where often the cabinet has to be built on site.

CSX and CSXi soft starters

The CSX and CSXi are compact soft starter products intended for use with three-phase motors ranging from 7.5 to 110 kW at 400 VAC. Designed with the 'first time' user in mind, the CSX and CSXi incorporate a number of features aimed specifically at simplifying the installation and commissioning process while also reducing the installed cost.

Insulated flexible busbar

The Eriflex range of insulated flexible busbar is suitable for 'dropper' or 'take off' applications, from 125 to 3500 A. The rectangular design of Flexibar eliminates the need to terminate with crimped lugs and allows greater flexibility in tight switchboards. Due to its flat nature, it can be drilled for direct surface contact to the apparatus or clamped to solid copper busbar.

Motor protection relay

NHP has announced the Sprecher+Schuh CET5 Motor Protection Relay.

EVE Series cooling system

NHP and Cosmotec have released the EVE Series cooling system.

Joystick controller

The Spohn & Burkhardt VCS0 compact joystick controllers are a rugged, compact range that offers a six step selectable control in each direction. Their construction is of plastic Zytel housing and treated, rugged metal components, making them suitable for use in corrosive environments.

Fuse disconnectors

The EasyLine XLP range of fuse connectors uses state-of-the-art design with beneficial accessories ready to snap on. Many features have been incorporated in the construction of the EasyLine XLP range such as essential safety features, ease of use, quick make operation and increased environmental compliance.

Overload Relay

The Sprecher+Schuh CEP 7-B electronic overload relay from NHP is an enhanced version of the standard CEP 7. Covering motors up to 48 kW and up to 85 A at 415 V, this overload relay takes the basic CEP 7 overload relay and adds to it some new features. These include increased tripping accuracy, rapid phase failure detection, ground fault protection, jam/stall protection, low thermal dissipation, adjustable selection of motor run up times (10, 15 or 20 selectable via DIP-switches), auto/manual reset, visible trip indication and test button. It is a self-powered unit that also houses 1 normally-open 1 normally-closed electrically isolated alarm contacts.

News

NHP to become sole South Pacific distributor for Rockwell

NHP has been granted sole distributor rights for Rockwell Automation products, systems and solutions in the South Pacific, effective 1 May.

NHP partnering to help disadvantaged kids

NHP is partnering with Southern Cross Kids’ Camps (SCKC) to assist it in expanding its programs across Australia and New Zealand to make a difference in the lives of disadvantaged kids.

NHP and Alstom Grid sign distribution agreement

After an 18-month supply partnership, NHP and Alstom Grid have signed a distribution agreement.

NHP and Cortem Group announce distribution agreement

NHP has announced its exclusive distribution agreement with HAE specialists Cortem Group.

NHP opens new branch in Launceston

NHP Electrical Engineering Products opened a new Launceston branch on 19 October.

NHP now authorised ANZ distributor for Allen-Bradley

From 1 July, NHP will be supporting customers with the Allen-Bradley, Rockwell software and Guardmaster range of products in its designated areas of Australia and throughout New Zealand.

White Papers

Optimise the performance of your process plant

An older distributed control system (DCS) cannot operate a modern process plant at optimum levels. Upgrading to the next-generation automation system means superior overall performance, a reduction in downtime, and lower maintenance and operational costs. The sufficient return on investment from this handful of measures justifies an upgrade.

5 reasons to upgrade your old DCS to a new automation system

 An older DCS is typically not capable of running a modern process plant at optimum levels, creating increased costs and possibly causing excessive downtime.

 



 

 

Categories

Brands

  • All content Copyright © 2022 Westwick-Farrow Pty Ltd