Directory Search



National Instruments Australia

Since 1976, NI has developed software and hardware that have revolutionized and continue to redefine the way engineers develop systems that require measurement and control. The NI software-based approach incorporates rapidly advancing commercial technology, providing an integrated software and hardware platform that abstracts system complexity and significantly speeds application design, development, and deployment.


Website: australia.ni.com
Email: info.australia@ni.com
Phone: 1800 300 800
Fax: 02 9888 6611
Address:
PO Box 382 , North Ryde NSW 1670 (Directions)

Products

National Instruments LabVIEW NXG 1.0

LabVIEW NXG 1.0 is designed to deliver the productivity of LabVIEW to non-programmers.

NI cDAQ-9185 and cDAQ-9189 multislot Ethernet chassis

NI has released the cDAQ-9185 and cDAQ-9189 multislot Ethernet chassis, introducing time-based synchronisation built on the latest Ethernet standards and furthering NI's efforts in Time Sensitive Networking (TSN) and rugged CompactDAQ hardware for distributed measurements.

National Instruments PXIe-4081 7½-digit high-performance DMM

The NI PXIe-4081 is claimed to be the industry's most accurate 7½-digit DMM, with a 15 ppm accuracy for DC voltage measurements up to two years after calibration.

National Instruments LabVIEW 2015

The latest version of LabVIEW delivers speed improvements, development shortcuts and debugging tools to empower developers to efficiently interact with the systems they create.

National Instruments Controller for FlexRIO

The Controller for FlexRIO is now available with a dual-core ARM processor and a Kintex-7 FPGA.

National Instruments CompactRIO controller

The CompactRIO controller is now available with an Intel Atom quad-core 1.91 GHz processor, making it possible to tackle more tasks with the same controller and process data with greater precision, accuracy and speed.

NI CVS-1459RT vision system

The NI CVS-1459RT is a small, rugged vision system with a quad-core Intel Atom processor and two dedicated USB 3.0 ports for USB3 Vision cameras.

NI InsightCM Enterprise condition-monitoring software

NI InsightCM Enterprise is a software solution that helps companies gain insight into the health of their capital equipment for machine maintenance and operations.

NI CompactDAQ 4-slot controller

By integrating the processor, signal conditioning and I/O into a single CompactDAQ system, engineers and scientists can reduce overall system cost and complexity while increasing measurement accuracy.

National Instruments cDAQ-9188XT rugged data acquisition system

The NI cDAQ-9188XT is a rugged, 8-slot NI CompactDAQ ethernet chassis that is designed for distributed or remote measurements in extreme environments.

National Instruments cRIO-9068 software-designed controller

The cRIO-9068 software-designed controller has been completely redesigned but maintains full NI LabVIEW and I/O compatibility with the CompactRIO platform.

National Instruments LabVIEW 2013

National Instruments has released NI LabVIEW 2013, the latest version of its system design software for engineers and scientists.

National Instruments PXIe-4112 and NI PXIe-4113 PXI programmable power supply modules

The NI PXIe-4112 and NI PXIe-4113 modules provide high power density, saving rack space and simplifying design by eliminating the need to mix multiple instrumentation form factors.

National Instruments cRIO-9082 control system

The high-performance multicore NI cRIO-9082 system provides advanced Intel Core i7 dual-core processing at 1.33 GHz, and a built-in VGA display output for an integrated user interface.

National Instruments VeriStand 2012

VeriStand 2012 supports real-time model execution from a variety of modelling environments and has an open, extensible architecture to create custom code modules or incorporate custom user interfaces.

National Instruments NI 9467, NI 9469, NI 8381, NI 99229, NI 9239 and NI 9220 C Series modules

National Instruments has announced six C Series modules designed for NI CompactRIO embedded control systems and NI CompactDAQ modular data acquisition systems.

National Instruments stand-alone NI CompactDAQ system

The NI CompactDAQ System features an Intel Core i7 dual-core processor, 2 GB RAM and 32 GB nonvolatile storage.

National Instruments WSN-3214 wirelss strain/bridge completion node and NI 9232 data acquisition card

The wireless sensor network (WSN) strain node and C Series DAQ module can be used for predictive maintenance to predict faults and analyse fatigue.

National Instruments NI PXIe-8135 embedded controller

The NI PXIe-8135 features the quad-core Intel Core i7 processor and USB 3.0 connectivity.

National Instruments NI PXIe-1085 all-hybrid PXI-Express chassis

The PXIe-1085 all-hybrid PXI Express chassis features PCI Express 2.0 x8 links to every slot for increased data throughput.

National Instruments NI TestStand 2012

NI TestStand 2012 now has a modular process architecture to increase flexibility and throughput.

National Instruments LabVIEW 2012

LabView 2012 provides recommended application architectures, stability improvements and environment enhancements derived directly from customer feedback.

National Instruments DIAdem 2012 data analysis software

DIAdem is optimised to operate on large data sets, includes engineering-specific analysis functions, features a powerful drag-and-drop report editor and runs scripts for automating repetitive tasks.

National Instruments Drivven C Series engine control modules

Drivven C Series engine control modules provide engine researchers with modular engine-specific I/O for interfacing directly with internal combustion engine subsystems and actuators.

National Instruments LabVIEW Electrical Power Suite

National Instruments has announced the LabVIEW Electrical Power Suite, a toolkit specific to the power industry.

National Instruments PXIe-4357 RTD module

The NI PXIe-4357 RTD module integrates sensor-specific signal conditioning with 24-bit, delta-sigma ADCs to sample all 20 channels at 100 Sa/s and offers typical accuracies of up to 0.09°C.

National Instruments PXIe-1066DC 18-slot chassis

The NI PXIe-1066DC 18-slot chassis adds high availability features to improve the system-level MTBF and MTTR of PXI systems in test, measurement and control applications.

National Instruments NI 9795 C Series wireless gateway and NI WSN-3230, WSN-3231 measurement nodes

National Instruments has announced the NI 9795 C Series wireless gateway and the NI WSN-3230 and WSN-3231 measurement nodes, extending the capabilities of the NI wireless sensor network (WSN) platform.

National Instruments PXIe-8115 embedded controller

The NI PXIe-8115 high-performance embedded controller features a 2.5 GHz dual-core Intel Core i5 processor.

National Instruments single-board RIO board-level embedded devices

National Instruments single-board RIO board-level embedded devices feature a real-time processor, Spartan-6 field-programmable gate array (FPGA), analog and digital I/O and more built-in peripherals for custom embedded control and monitoring applications.

National Instruments Sound and Vibration Measurement Suite

The latest version of the NI Sound and Vibration Measurement Suite software provides a comprehensive collection of analysis and signal processing tools for noise, vibration and harshness (NVH) testing, machine condition monitoring (MCM) and audio test applications. Engineers can use the suite as stand-alone software or combine it with NI hardware and NI LabVIEW system design software to simplify test system development and control.

National Instruments NI 177x IP67 smart cameras range

The NI 177x range of smart cameras features a 1.6 GHz Intel Atom processor for increased processing power and an IP67 rating to protect the hardware from dust and water. The cameras also have a real-time operating system to deliver the reliability and determinism needed on a production floor.

National Instruments Watchdog Agent Prognostics Toolkit for LabVIEW

The Watchdog Agent Prognostics Toolkit for NI LabVIEW expands the capabilities of LabVIEW in machine prognostics and health management (PHM) applications. The toolkit is a product of collaboration between NI and the National Science Foundation’s Industry/University Cooperative Research Center on Intelligent Maintenance Systems at the University of Cincinnati. It is designed for serving engineers’ increasing demand for monitoring and reporting the health status of machines, structures, components and systems.

National Instruments VeriStand 2011 real-time and HIL testing

National Instruments has released NI VeriStand 2011, its configuration-based software environment for creating real-time testing and simulation applications including hardware-in-the-loop (HIL) simulators and test cells. This updated version includes a real-time stimulus profile tool that expands deterministic test execution with looping and branching structures, composable arithmetic functions and multitasking. Engineers can combine NI VeriStand 2011 with INERTIA, an add-on from Wineman Technology, which adds a suite of tools to NI VeriStand for optimised closed-loop control of dynamometer and servo-hydraulic-based test cells.

NI cDAQ-9191, cDAQ-9181 and cDAQ-9171 1-slot chassis

The 1-slot NI CompactDAQ chassis supports wireless, USB and ethernet buses, giving engineers and scientists the portability of a data logger with the performance and flexibility of modular measurements.

National Instruments LabVIEW 2011

National Instruments has released NI LabVIEW 2011, the 25th-anniversary version of its system design software. It is designed to increase development efficiency through new engineering-specific libraries and its ability to interact with almost any hardware device or deployment target.

National Instruments CompactRIO cRIO-908x systems and sbRIO-9605/06 boards

The NI cRIO-908x systems feature an Intel Core i7 1.33 GHz dual-core processor for increased processing power, Xilinx Spartan-6 field-programmable gate arrays (FPGAs) and the option of a Windows Embedded Standard 7 (WES7) OS configuration for monitoring and control applications that require high performance and the ruggedness of CompactRIO.

NI cRIO-9075 and cRIO-9076 integrated chassis and controllers

The NI cRIO-9075 and cRIO-9076 integrated chassis and controllers are designed to lower the cost of the NI CompactRIO platform for embedded control and monitoring applications.

National Instruments 9792 WSN gateway and WSN-3226 measurement node

National Instruments has announced two additions to the communication and measurement capabilities of the NI wireless sensor network (WSN) platform. The 9792 is a programmable WSN gateway that can communicate with NI WSN measurement nodes as well as other hardware through a variety of open communication standards, and the WSN-3226 voltage/resistance temperature detector (RTD) combination node provides support for resistance-based measurements such as RTDs and potentiometers and provides engineers and scientists the ability to combine voltage and temperature measurements on a single NI WSN device.

National Instruments TPC-2206 and TPC-2212 touch panel computers

National Instruments has released a line of touch panel computers with an extended operating temperature range based on the 1.33 GHz Intel Atom processor. With these processors, engineers can build high-performance human machine interfaces (HMIs) with a low-power, fanless device.

National Instruments CompactRIO and Single-Board RIO vision systems

National Instruments has announced the addition of machine vision capabilities to NI CompactRIO and NI Single-Board RIO hardware devices that provide engineers with an integrated measurement and control platform for industrial and embedded systems.

National Instruments VeriStand 2010 testing environment

National Instruments has announced NI VeriStand 2010, which includes enhancements that expand its capabilities for hardware-in-the-loop (HIL) and real-time testing by supporting high-performance, multiple chassis PXI systems and low-cost, ruggedised options using NI CompactRIO and NI Single-Board RIO hardware deployments. NI VeriStand 2010 also features enhanced connectivity with NI LabVIEW, making it easier for engineers to re-use existing software and further customise their VeriStand applications.

National Instruments PXIe-4844 optical sensor interrogator

The NI PXIe-4844 optical sensor interrogator is a two-slot 3U PXI Express module for fibre Bragg grating (FBG) sensors. FBG sensors operate by reflecting a wavelength of light that corresponds to changes in physical phenomena such as strain and temperature.

National Instruments CompactDAQ modular data acquisition system

The ethernet-based NI CompactDAQ modular data acquisition system is designed to combine the ease of use and low cost of a data logger with the performance and flexibility of modular instrumentation. The NI cDAQ-9188 chassis is designed to hold eight I/O modules for measuring up to 256 channels of electrical, physical, mechanical or acoustic signals in a small (25 x 9 x 9 cm), rugged form factor. With more than 50 different hot-swappable I/O modules to choose from, engineers and scientists can build high-speed measurement systems using standard gigabit ethernet infrastructure. In addition, NI CompactDAQ offers simplified initial set-up with zero configuration networking technology and a built-in, web-based configuration and monitoring utility.

National Instruments LabVIEW 2010

National Instruments has announced LabVIEW 2010, the latest version of its graphical programming environment for design, test, measurement and control applications.

National Instruments CompactRIO PROFIBUS C Series modules

Interfaces for PROFIBUS, FOUNDATION Fieldbus and DeviceNet that make it possible for engineers to connect LabVIEW, programmable automation controllers (PACs) and embedded systems to their existing industrial networks have been announced.

National Instruments SC Express family PXI DAQ modules

National Instruments has announced the company’s first data acquisition (DAQ) modules with integrated signal conditioning on PXI Express. The SC Express family offers increased accuracy, high data throughput and synchronisation for measuring strain gauges, bridge-based transducers, thermocouples and high-voltage analog inputs. PXI Express provides 250 MBps of dedicated bandwidth for each SC Express module in the chassis.

National Instruments PXIe-8133 quad-core embedded controller

The NI PXIe-8133 embedded controller features the quad-core Intel Core i7-820QM processor. It is designed to help engineers greatly reduce test time with double the processing performance and data throughput compared to previous NI controllers.

National Instruments backplanes for PXI/CompactPCI and PXI Express

National Instruments now offers board-level backplanes from its PXI/CompactPCI and PXI Express chassis for OEMs to use in applications ranging from aerospace/defence to industrial embedded control. Engineers and scientists can use the PXI/CompactPCI backplanes to create custom, rugged applications that meet their unique form factor needs or environmental specifications.

National Instruments FlexRIO FPGA modules

The NI FlexRIO FPGA modules for PXI Express and a baseband transceiver adapter module are designed to deliver optimised solutions for high-speed signal processing and other automated test and measurement applications. They also offer a commercial off-the-shelf (COTS) solution with NI LabVIEW FPGA technology and high-speed, reconfigurable I/O (RIO) for PXI and PXI Express systems.

National Instruments LabVIEW Robotics 2009

LabVIEW Robotics 2009 is designed to provide a standard development platform for designing robotic and autonomous control systems. NI LabVIEW Robotics 2009 provides an extensive robotics library with connectivity to standard robotic sensors and actuators, foundational algorithms for intelligent operations and perception and motion functions for robots and autonomous vehicles.

National Instruments sbRIO-9602XT, sbRIO-9612XT, sbRIO-9632XT and sbRIO-9642XT I/O boards

National Instruments has announced four new extended operating temperature versions of the NI Single-Board RIO devices, featuring a -40 to 85°C operating temperature range.

FPGA capabilities for distributed I/O

National Instruments has announced new FPGA capabilities for the NI 9144 expansion chassis. By downloading the NI-Industrial Communications for EtherCAT 1.1 driver from ni.com, engineers and scientists can now run LabVIEW FPGA code directly on the NI 9144 chassis to execute custom triggering, inline processing and control within an application.

Motion control development system

National Instruments has announced the LabVIEW NI SoftMotion Module, which simplifies the development of advanced single- and multi-axis motion applications, and new NI C Series modules, which expand the connectivity of the NI CompactRIO programmable automation controller (PAC) platform to hundreds of servo and stepper drives.

National Instruments motion control development system

National Instruments has announced NI VeriStand 2009, a configuration-based software environment for creating real-time testing applications such as hardware-in-the-loop (HIL) and controlled environmental tests.

Virtualisation technology

National Instruments' LabVIEW 2009 introduces Distributed Intelligence and Digital Prototyping for advanced control.

Development platform

National Instruments has announced LabVIEW 2009, a graphical system design software platform for control, test and embedded system development.

Wireless sensor networks platform

The NI wireless sensor networks (WSN) platform offers a complete remote monitoring solution that consists of NI LabVIEW graphical programming software and reliable, low-power wireless measurement nodes.

Embedded vision system

The EVS-1464RT embedded vision system is a high-performance, multicore controller capable of processing images from multiple IEEE 1394 and GigE Vision cameras. Additionally, the EVS-1464RT features an extended temperature range, a real-time operating system, a solid-state hard drive and a fanless design, making it suitable for use in harsh industrial environments.

DAQ thermocouple module

National Instruments has announced the NI 9213, which adds high-density thermocouple measurements to the NI C Series platform. Using the NI 9213, engineers can create a compact, modular data acquisition system to collect data from up to 16 independent thermocouples.

Wireless DAQ modules and enclosures

National Instruments has announced six wireless and ethernet data acquisition modules and two ingress protection (IP) enclosures for remote monitoring and control in harsh environments.

High-performance controller and chassis

The National Instruments CompactRIO programmable automation controller is an advanced embedded control and data acquisition system designed for applications that require high performance and reliability.

Prototyping hardware

National Instruments has announced a suite of prototyping hardware that makes it possible for engineers and scientists to prototype industrial and embedded projects faster, reduce time to market and lower development costs. The five NI CompactRIO reconfigurable chassis feature a Xilinx Virtex-5 field-programmable gate array (FPGA). Additionally, the NI cRIO-9022 controller features a Freescale 533 MHz industrial real-time processor that delivers faster real-time processing for time-critical control applications.

Quad-core embedded controller

The NI PXI-8110 is a 3U quad-core embedded controller for PXI systems. Featuring a 2.26 GHz Intel Core2 Quad processor Q9100, up to 4 GB of 800 MHz DDR2 RAM and a high-performance 7200 rpm drive, the PXI-8110 provides an up to 80% performance improvement over dual-core controllers with similar CPU clock frequencies for applications that are optimised to use the controller’s four processing cores.

Wireless and ethernet data acquisition modules

National Instruments has announced six wireless and ethernet data acquisition modules and two ingress protection (IP) enclosures for remote monitoring and control in harsh environments.

Noise and vibration analysis

The NI Sound and Vibration Measurement Suite Version 7.0 extends analysis functionality with NI LabVIEW virtual instruments (VIs) for performing psychoacoustic measurements, making it possible for engineers to quickly set up tests for noise, vibration and harshness (NVH), machine condition monitoring and sound quality. Additionally, National Instruments announced the NI USB-4432, a portable bus-powered dynamic signal acquisition module for making high-accuracy sound and vibration measurements.

Wi-Fi and ethernet data acquisition

National Instruments Wi-Fi data acquisition (DAQ) devices combine IEEE 802.11 wireless or ethernet communication, direct sensor connectivity and the flexibility of NI LabVIEW software for remote monitoring of electrical, physical, mechanical and acoustical signals.

Single-board reconfigurable I/O platform

National Instruments has released Single-Board RIO devices that offer engineers and scientists a low-cost, integrated hardware option for deploying embedded control and data acquisition applications for OEMs and machine builders.

LabVIEW development platform

LabVIEW 8.6 expands on the built-in multithreading technology of the LabVIEW platform, offering higher performance through multicore-optimised features, which can help engineers process increasing amounts of measurement data to meet advanced control application challenges and increase test system throughput.

Compact field controllers

National Instruments has announced three Compact Fieldpoint Controllers that deliver increased performance, higher processor speed and significantly improved ethernet throughput. The NI cFP-2220, cFP-2210 and cFP-2200 controllers include a 400 MHz PowerPC processor and Wind River VxWorks real-time operating system (RTOS) for greater processing power and faster data analysis.

Compact field controllers

National Instruments has announced three Compact Fieldpoint Controllers that deliver increased performance, higher processor speed and significantly improved ethernet throughput.

CompactRIO controller and chassis

National Instruments has released the NI cRIO-9072 and cRIO-9074 CompactRIO systems that give engineers and machine builders a suitable solution for rapidly deploying industrial machines at high volume.

Graphical programming for the next-generation multicore PC

National Instruments has released NI LabVIEW 8.5, the latest version of the graphical system design platform for test, control and embedded system development. Building on nearly 10 years of investment in multithreading technology, LabVIEW 8.5 simplifies multicore as well as FPGA-based application development with its intuitive parallel dataflow language.

NI CompactRIO - rugged, embedded, reconfigurable

The National Instruments CompactRIO programmable automation controller (PAC) is a low-cost reconfigurable control and acquisition system designed for applications that require high performance and reliability. The system combines an open embedded architecture with small size, extreme ruggedness and hot-swappable industrial I/O modules.

Simple, complete USB-based platform for data acquisition and signal conditioning

CompactDAQ hardware provides the plug-and-play simplicity of USB to sensor and electrical measurements on the benchtop, in the field and on the production line.

PXI-4110 programmable DC power supply

Engineers now can source voltage or current with high accuracy from a single PXI slot with the National Instruments PXI-4110 programmable DC power supply.

Vision software

The NI Vision 8 development module is a comprehensive suite of vision software tools that engineers, integrators and machine builders can use to improve system efficiency and increase quality control in the manufacturing process. The Vision 8 development module combines a collection of vision libraries with acquisition software for thousands of cameras, including those based on the IEEE 1394 (FireWire) connection standard, all optimised for common programming environments like NI LabVIEW and Microsoft C++, Visual Basic and .NET. In addition, the Vision 8 development module includes new algorithms for golden template comparison, optical character verification (OCV) and data matrix grading that are designed to help engineers identify packaging and assembly errors earlier in production.

Distributed motion applications

Engineers can use the National Instruments LabVIEW graphical development environment to create powerful distributed motion applications with the NI SoftMotion controller for Copley CANopen and ORMEC IEEE 1394 intelligent drives.

Ethernet linking

Process engineers now can extend plant-wide control applications to include ethernet capabilities with the National Instruments FBUS-HSE/H1 fieldbus high-speed ethernet linking device.

PXI modular instrumentation

Test and design engineers can generate high-frequency sine and clock outputs with the latest addition to the National Instruments line of PXI modular instrumentation.

Virtual instrumentation upgrade

National Instruments has announced LabVIEW 7 Express, a major upgrade to the entire family of LabVIEW graphical development products.

PXI modular instrumentation

Test and design engineers can generate high-frequency sine and clock outputs with the latest addition to the National Instruments line of PXI modular instrumentation.

Control module

The FP-2015 real-time control module has expanded non-volatile flash memory of 512 MB, and it increases memory for extended data logging. Users can log up to 16 temperature channels for more than three months. More complex NI LabVIEW code with an increased onboard DRAM of 32 MB can also be run.

News

Annual robotics competition finals in Sydney

National Instruments has announced the live finals of the 7th Annual Autonomous Robotics Competition, to be held at the University of Technology Sydney in September.

University of South Australia wins NI Autonomous Robotics Competition

The University of South Australia claimed victory on Tuesday at the 2015 National Instruments Autonomous Robotics Competition (NI ARC), defeating 21 university teams from Australia and New Zealand in the live final held at the University of New South Wales.

First NZ team wins NI Autonomous Robotics Competition

The winner of the 2013 National Instruments (NI) Autonomous Robotics Competition is Victoria University of Wellington (VUW).

Registrations open for 2013 NI Technical Symposiums

Registrations for the 2013 National Instruments (NI) Technical Symposiums are now open. The free annual professional development conference series will be held in Melbourne, Sydney and Auckland from 29 October to 7 November 2013.

Agreement will boost engineering research

National Instruments and Flinders University have signed an agreement that will significantly boost the university’s teaching capacity and engineering research.

Students prepare for Autonomous Robotics Competition

Engineering and mechatronics students from leading Australian and New Zealand universities are preparing to face off in the final of the National Instruments Autonomous Robotics Competition in Melbourne.

NI LabVIEW Developer Days attract 200+ attendees

More than 200 engineers attended National Instruments’ 2013 LabVIEW Developer Days, a series of events providing new and existing LabVIEW users an opportunity to learn about time-saving tips and expert development techniques.

NI LabVIEW Developer Days coming to Australia and NZ

National Instruments has opened registrations for the 2013 LabVIEW Developer Days, providing an opportunity for new or existing LabVIEW users to learn about time-saving tips and expert development techniques.

Competitors for international robotics competition announced

More than 20 student teams from leading universities across Australia and New Zealand will demonstrate their engineering and mechatronics skills on an international platform in the 2013 National Instruments Autonomous Robotics Competition (NI ARC).

Registration open for 2012 NI Embedded Control and Monitoring Technology Roadshow

Registration is now open for National Instruments’ 2012 Embedded Control and Monitoring Technology Roadshow, a series of free technical events featuring the latest trends, technologies and information.

LabVIEW helps Baumgartner break the sound barrier

When Felix Baumgartner achieved his record-breaking jump on Monday, his progress and condition were monitored using NI LabVIEW.

Frogstar takes out robotics competition

Swinburne University of Technology’s Team Suave has won first place in the National Instruments Autonomous Robotics Competition with its trained robot, Frogstar, beating 17 other university teams for the second consecutive year.

17 finalists announced for NI Autonomous Robotics Competition

The National Instruments (NI) Autonomous Robotics Competition now has its 17 finalists. The student university teams will travel from across Australia and New Zealand to compete in the competition final at Swinburne University.

NI and UniMAP collaborate to advance engineering and robotics education

National Instruments (NI) and Universiti Malaysia Perlis (UniMAP) have announced their collaboration in advancing engineering and robotics education, signing a memorandum of understanding at UniMAP’s Agrotechnology Research Station.

Precision Mechatronics becomes NI Alliance Partner

National Instruments Oceania has established a partnership with Sydney-based Precision Mechatronics to expand its abilities in advanced manufacturing, mission-critical and large-scale deployments.

National Instruments releases 2012 Embedded Systems Outlook

National Instruments has released its 2012 Embedded Systems Outlook report, which shares the company’s conclusions about the direction of the embedded systems market.

Swinburne team wins 2011 NI Autonomous Robotics Competition

Team SUAVE from Swinburne University of Technology in Victoria has won first prize in the inaugural National Instruments Autonomous Robotics Competition.

Teams announced for the NI 2011 Autonomous Robotics competition

National Instruments Oceania has announced the competing teams for the inaugural National Instruments Autonomous Robotics Competition, a student robotics competition designed to encourage development and innovation in the field of robotics.

National Instruments announces 2011 Green Engineering Grant program

National Instruments has announced its 2011 Green Engineering Grant program, a worldwide competitive program that fosters rapid design, prototyping and commercialisation of promising new renewable energy, energy-efficiency and smart grid systems.

Categories

Brands

  • All content Copyright © 2021 Westwick-Farrow Pty Ltd