M Rutty & Co
Established in 1883, M Rutty & Co concentrates on supplying the highest quality components to the Australian electronics, telecommunications and networking markets.
|Phone:||02 9457 2222|
|Fax:||02 9457 2299|
4 Beaumont Road , Mt Kuring-gai NSW 2080 (Directions)
Dunkemotorwen brushless DC servomotors are now available with a Profibus DP interface.
Dunkermotoren has released the PLG63. A compact planetary gearbox with continuous torque up to 100 Nm, it integrates well with the BG65 S DC servomotor.
FAS Technology is focused on developing new technologies in the field of motion control with DSP technology.
Portescap has introduced the RoHS-compliant EBL-H-50-03 four-quadrant amplifier. With fully programmable features, this hall sensor amplifier is specifically engineered to optimise the performance of Portescap brushless motors in applications where efficiency, high acceleration or safety are of primary significance. All inputs and outputs are clearly identified to facilitate easy start-up in less than 10 minutes.
The MR2 magneto-resistive encoder is designed as a positioning and speed control solution for medical, security and access, industrial automation and electronics assembly related applications. For machine builders in these industries, a system design can be implemented with a lower line count of 128 lines for first-generation products and upgraded to a higher resolution line count of 512 lines for future-generation products, without any motor-encoder assembly change.
The BG65 motors from Dunkermotoren have smooth housings in order that machinery and facilities manufacturers working within the food and beverage industry are able to capitalise on the advantages of electronically commutated DC motors.
The air gap dish armature in Mavilor’s MSS series DC servomotors is specially suitable for high response, giving a high and smooth torque-to-inertia ratio, non-cogging torque and low-speed velocity control.
SG worm gearboxes from Dunkermotoren are noted for their quiet running. The worm-gear shaft has bearings on both sides. The gear components, made of bronze or steel, and the lubrication ensure a long service life at the rated torque.
The Portescap Athlonix high power density brush DC motors are compact, high-efficiency, high-endurance motors delivering high speed-to-torque performance in a compact lighter weight package (15-53 g depending on frame size) with output power of up to 9 W.
Mavilor’s BL Series is a synchronous electrical servomotor, with three winding phases, supplied with sinusoidal or trapezoidal current wave forms.
With fully programmable features, this hall sensor amplifier is specifically engineered to optimise the performance of Portescap’s brushless motors in applications where efficiency, high acceleration or safety are of primary significance. All inputs and outputs are clearly identified to facilitate easy startup in less than 10 mins.
With the ability to continuously transmit torques up to 160 Nm, the planetary gears in this range are suitable for the recently introduced BG75 brushless DC motor.
The short mechanical time constant of the Mavolor MA Series AC servomotors makes them suitable for control operations, while an extremely short electrical time constant provides high peak torque at high speed. A high ‘theoretical’ acceleration also gives an extremely fast response time.
Electronically commutated DC motors now incorporate functions that were previously the preserve of AC servo-motors. With output powers up to 500 W and torques up to 5 Nm, the BG75 DC motors by Dunkermotoren are able to take on numerous drive tasks in industrial automation.
The GR53 and GR63 motors from Dunkermotoren are cost-effective DC commutator motors with comprehensive digital electronic regulation and control.
Dunkermotoren has released the BG 42, an optimised brushless DC-motor with Hall sensors and flying leads as well as the brushless DC servomotor BG 45 with integrated power and logic electronics. They provide output power up to 75 W and torque up to 16 Ncm.
The GR 22, G 30.1 and G 30.0 motors are now available in versions with neodymium magnets. Compared with the basic version of the motors with ferrite magnets, they offer up to 30% higher starting torque. The speed characteristic of these motors under load is marked by a flatter characteristic curve and thus smaller variations in speed.
Portescap’s 2-wire brushless motor has been specifically engineered for the micro pump market. The integrated electronic brushless motor offers low operation noise and dependable reliability with the compact design and ease of control associated with brush motors.