Beamex CENTRiCAL workshop calibration test bench
01 November, 2021 | AMS Instrumentation & Calibration Pty LtdThe CENTRiCAL workshop calibration test bench is designed to combine ease of use, versatility and ergonomics for performing calibrations in a workshop.
Michell S8000–100 low dew-point hygrometer
01 September, 2021 | AMS Instrumentation & Calibration Pty LtdThe Michell S8000–100 is a high-precision, low dew-point hygrometer designed to meet the demands of humidity calibration and standards laboratories.
Katronic KATflow clamp-on flowmeters with Profibus PA
01 June, 2021 | AMS Instrumentation & Calibration Pty LtdThe KATflow 150 and KATflow 170 clamp-on, non-invasive flowmeters are now available with Profibus PA digital communications.
Interface WTSSHK-B-HL telemetry load shackles
01 May, 2021 | AMS Instrumentation & Calibration Pty LtdThe WTSSHK-B-HL range of telemetry load shackles is suitable for providing a robust and effective method of measuring large tensile loads.
VorTek Instruments Pro-V M24 multivariable vortex flowmeter
09 March, 2021 | AMS Instrumentation & Calibration Pty LtdThe Pro-V M24 vortex flowmeter incorporates a velocity sensor, a precision platinum RTD temperature sensor and a solid-state pressure transducer.
FCI ST80 Series thermal mass flow meter
01 March, 2021 | AMS Instrumentation & Calibration Pty LtdThe ST80 Series thermal mass flow meter features a hybrid sensor system that combines both constant power (CP) and constant temperature (CT) technologies.
Process Vision LineVu gas contamination detector
03 February, 2021 | AMS Instrumentation & Calibration Pty LtdLineVu is a video-based system designed to detect contamination in high-pressure gas systems.
Michell Instruments humidity probe calibration solution
20 November, 2020 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has released a solution for in-house calibration of humidity probes, combining a humidity validator with a chilled mirror hygrometer.
Bronkhorst ES-FLOW ultrasonic flow meters
17 November, 2020 | AMS Instrumentation & Calibration Pty LtdBronkhorst has released an updated generation of ES-FLOW ultrasonic flow meters for low flow rates of water, additives and other liquid substances.
McMenon MAPT averaging pitot tubes
01 November, 2020 | AMS Instrumentation & Calibration Pty LtdThe MAPT is a multiport self-averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement.
Michell Easidew PRO XP dewpoint transmitter
12 October, 2020 | AMS Instrumentation & Calibration Pty LtdThe Easidew PRO XP explosion-proof dewpoint transmitter is now part of Michell’s calibration exchange program.
Michell Instruments Pura Trace moisture transmitter
29 September, 2020 | AMS Instrumentation & Calibration Pty LtdThe Pura Trace moisture transmitter is now available with an M12 connector for dual analog and digital communication.
Fluid Components International FS10i flow switch
01 September, 2020 | AMS Instrumentation & Calibration Pty LtdThe FS10i is a universal flow switch and flow monitor designed for simple insertion into 13 mm or larger diameter pipes and square ducts.
McMenon FPD300 venturi tube DP primary flow element
03 August, 2020 | AMS Instrumentation & Calibration Pty LtdThe FPD300 classical venturi tube is a robust, low pressure-loss device that is available in line sizes 50 to 1200 mm as standard, with larger sizes available.
Michell CDP301 portable HCDP tester
22 July, 2020 | AMS Instrumentation & Calibration Pty LtdThe CDP301 portable HCDP tester uses the chilled-mirror principle for both hydrocarbon and water dew-point measurements.
