The Omron OS32C type 3 safety laser scanners provide compact and versatile presence detection to protect machine operators and factory staff. By integrating an Ethernet interface, the scanners allow easy configuration via a remote PC with few inputs required. Supervisors can monitor status from the desktop and analyse the causes of any emergency stops, which helps improve safety practices and reporting. Multiple OS32Cs can be connected to the network and monitored in turn.
The sensor allows a safety zone of up to 4 m radius and two warning zones of up to 15 m, and can generate an alarm sounder, speed-control signal or emergency stop if zone conditions are breached. It is also capable of direction monitoring, and can detect intrusion from either side due to a 270° detection angle.
The OS32C comprises a detachable sensor block and an I/O block, which stores the configuration. This allows fast and easy replacement of any damaged sensors, with no reprogramming required. The I/O block is available with rear or side cable entry for extra flexibility. At 104.5 mm diameter, weighing 1.3 kg and drawing only 5 W active and 3.75 W standby power consumption, the sensors are easy both to handle and install.
Phone: 1300 656 636
IDEC XW1E assisted emergency stop
The assisted emergency stop switch, with optional activation assist function, extends the ability...
Rosemount 965 flame detector for hazardous areas
Emerson has expanded its flame detection range for broader application flexibility in hazardous...
WITT 85-30 SMART flashback arrestor
The 85-30 SMART flashback arrestor offers an active monitoring function, changing it from a...




