Banner Engineering SC10 Series safety controller/relay hybrid

Thursday, 30 July, 2020 | Supplied by: Turck Australia Pty Ltd


The Banner Engineering SC10 Series compact safety controller/relay hybrid is an easy-to-use safety controller for smaller machines that replaces the functionality of two or more safety relay modules. It features an intuitive user interface and advanced diagnostic capabilities.

In-Series Diagnostics (ISD) provides detailed status and performance data from each connected safety device, which can be accessed with a HMI or similar device, while intuitive, icon-based programming with drag-and-drop PC configuration simplifies device set-up and management.

The SC10 supports a wide range of safety devices, eliminating the need to buy and stock safety relay modules dedicated to specific safety devices. It provides two safety 6 A relay outputs each with three NO sets of contacts, and 10 inputs, including four that can be used as non-safe outputs. Industrial Ethernet two-way communication enables 256 virtual non-safe status outputs and 80 virtual non-safe inputs (reset, on/off, cancel off-delay and mute enable).

Online: www.turck.com.au
Phone: 1300 132 566
Related Products

Pizzato Elettrica BN series safety control device unit

With the BN series control units, the fixing modules can be rotated on the top and bottom of the...

PIzzato Elettrica ST H series RFID safety sensors

Devices of the ST H series can be configured with a permanent magnet incorporated inside the...

Allen-Bradley Guardmaster SafeZone 3 laser scanner

The Allen-Bradley Guardmaster SafeZone 3 laser scanner from Rockwell Automation is now enabled...


  • All content Copyright © 2021 Westwick-Farrow Pty Ltd