Banner Engineering illuminated E-Stop button

The Banner Engineering illuminated emergency stop pushbutton combines status indication and safety in one unit. With bright, highly visible illumination, the E-Stop is suitable for diverse emergency stop safety applications, helping to provide users with enhanced safety and productivity on the manufacturing floor.

Featuring Banner’s EZ-Light logic, the E-Stop pushbuttons provide an illuminated yellow base when the button is armed and the machine is enabled to run or is running. When the button is pushed, the yellow illumination turns to a flashing red indication to alert operators of an emergency stop condition. Users can easily reset only the pushed button or buttons, readying the device efficiently with minimal downtime. The yellow illumination can also turn to a steady red indication when a stop condition exists by applying an external signal via the M12 QD connector. To meet diverse application requirements, the E-Stops are available with two-colour yellow and red lighting, red lighting or a non-illuminated black base.

Offering a robust, IP65-rated design and 30 mm mounting base, the E-Stop pushbuttons allow convenient installation with no assembly, individual wiring or additional enclosure required. For applications requiring a series of E-Stops, multiple buttons can be interfaced and series connected. Flush (surface) mount models are also available.

The E-Stop button has a safe break action to ensure the safety contacts will open if the contact block is separated from the actuator. The push-to-stop, twist-to-release or pull-to-release actuator and direct (positive) opening operation is compliant with ANSI B11.19, ANSI NFPA79, ISO 13850 and IEC/EN 60204-1 Emergency Stop requirements.