Euchner CTP‑BI bistable safety gate lock
The Euchner CTP-BI is based on the CTP safety switch with the addition of a bistable locking function.
Under normal operation the guard locking is controlled via an input signal. When the operating voltage is switched off, the guard locking is maintained in its current position. This means that the safeguarded door remains either locked or unlocked, regardless of locking principle, until power is reapplied.
The bistable guard locking solenoid therefore provides an additional measure of prevention of an individual becoming accidentally locked inside a guard locked door, whether for service, maintenance or cleaning. It also prevents the deactivation of guard locking if there is a power failure.
Phone: 1300 65 75 64
Mitsubishi Electric MELSEC iQ-R Series CIP Safety module
The MELSEC iQ-R Series CIP Safety module occupies a dual slot on an iQ-R PLC rack and is...
Moore Industries SLA multifunction safety logic solver
The SLA performs as a multiloop logic solver with built-in voting and enhanced maths capability...
Dräger Polytron 8900 UGLD gas leak transmitter
The Dräger Polytron 8900 UGLD transmitter is an early warning area monitor for detecting...