GE RSTi-EP CPE115 programmable automation controller

Thursday, 06 September, 2018 | Supplied by: Control Logic Pty Ltd

The RSTi-EP CPE115 1 GHz programmable automation controller from GE Automation & Controls is designed to run real-time deterministic control applications and is an upgrade from the CPE100 with the addition of DNP3, commonly found in the water, oil and gas industries.

DNP3 support makes the CPE115 suitable for RTU applications with the usability of a PLC, including Ethernet communication protocols such as Profinet, SRTP Client Server, Modbus TCP/IP, OPC UA Server and EGD. Users can take advantage of existing user logic and custom software libraries through GE’s Proficy Machine Edition to save on time and overall development cost.

Featuring 1.5 MB of user memory, four Ethernet ports as well as both RS232 and RS485 serial ports, the latest cybersecurity threat protections and a wide operating temperature range of -40 to +70°C, the CPE115 is designed to improve performance, while reducing complexity and cost.

Phone: 1800 557 705
Related Products

R. Stahl EXICOM Series 500 Thin Clients

R. Stahl has released firmware version 5.5 for its EXICOM Series 500 Thin Clients.

Witt NV150 gas non-return valves

Gas non-return valves are needed to prevent the dangerous backflow of gases and the formation of...

Rotork Master Station valve actuator control system

The Rotork Master Station is capable of operating up to 240 actuators across three separate field...

  • All content Copyright © 2019 Westwick-Farrow Pty Ltd