SAM Hydraulik MD10 series of axial piston pumps
The SAM Hydraulik MD10 series of axial piston pumps is suitable for medium-pressure use, in closed loop applications. Rated at 250 bar (3600 psi) for continuous use, these pumps can take a peak pressure of up to 350 bar (5000 psi).
They are suitable for use in closed-circuit, medium-pressure hydraulic applications in earthmoving, construction, agriculture, municipal and others.
The series comes in a range of sizes ranging from 14 to 64 cc/rev. The pump series follows the SH6V high-pressure range previously released.
The pumps are designed to provide 100% through drive capacity, as the pumps are set to maximum mechanical displacement setting as standard. Through drive capability is available in SAE ‘A’ 9 tooth and SAE ‘B’ 13 tooth.
These pumps can be supplied with a full range of controls: manual, with and without zero position, manual lever with feedback, hydraulic proportional with feedback, electric two-position, electric impulse and electric with feedback.
A range of options is available, which includes boost filter and horsepower control.
The pump is suitable for most medium-duty hydraulic uses and is a complete drive machine that requires no modification. Complete fluid sealing is achieved using Viton seals.
Phone: 02 8848 4000
Festo VTEP proportional valve terminal
The VTEP proportional valve terminal uses high-precision piezo valves to reduce compressed air...
Kaeser CSG.1 oil-free rotary screw compressors
The CSG.1 rotary screw compressors have air flow rates ranging from 4 to 15 m³/min and...
ELGi Air~Alert compressor monitoring solution
Air~Alert is a data transmission and analysis service that monitors critical parameters and sends...