SMC Pneumatics Series EX600 I/O system

Wednesday, 21 April, 2010 | Supplied by: SMC Australia | New Zealand

SMC Pneumatics Series EX600 I/O system

The Series EX600 I/O system now includes the EtherNet/IP protocol.

Designed originally for the automotive industry, the Series EX600’s modular construction claims to offer a high degree of flexibility, including digital and analog inputs and outputs. Up to nine units can be connected in the same manifold and each unit can be installed with various input and output devices such as flow and pressure sensors, pressure regulators, pressure switches, valves and auto-switches.

The EX600 system also includes a self-diagnostic capability that provides short/open-circuit detection at each input/output, an on/off counter facility and parameter setting, which can all be controlled and monitored from a handheld terminal. With IP67 enclosure rating and Speedcon connectors, the installation and wiring time is also reduced.

Currently, the EX600 is used with SMC’s SV or VQC solenoid valves, and it is compatible with EtherNet/IP, Profibus-DP, DeviceNet and CC-Link protocols.

Online: www.smcanz.com
Phone: 1800 763 862
Related Products

Festo VTEP proportional valve terminal

The VTEP proportional valve terminal uses high-precision piezo valves to reduce compressed air...

Kaeser CSG.1 oil-free rotary screw compressors

The CSG.1 rotary screw compressors have air flow rates ranging from 4 to 15 m³/min and...

ELGi Air~Alert compressor monitoring solution

Air~Alert is a data transmission and analysis service that monitors critical parameters and sends...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd