Pepperl+Fuchs G20 ZPA roller modules

Sunday, 01 November, 2020 | Supplied by: Pepperl+Fuchs (Aust) Pty Ltd

G20 ZPA roller modules from Pepperl+Fuchs are designed to offer simplicity and flexibility. Integrated logic allows the modules to independently control 24 VDC motor rollers in conveyor systems without a higher-level control system.

Application-specific settings can be made directly on the modules and operation is simple. All settings required for operation can be made using a rotary switch on the back of the module. Eight speeds, five start/stop ramps in combination with the conveying direction and seven application-specific operating modes can be set quickly and easily.

The module’s compact design enables space-saving, tool-free mounting directly onto conveyor line support rails — required connection cables are already integrated into the module. This is designed to make connecting the motor rollers and sensors and wiring the module especially easy. The intelligent modules operate using neighbourhood detection and are immediately ready for operation once connected. With the G20 ZPA roller module, the infeed of packages on conveyor belts can be adjusted to match the rate of packages leaving the conveyor belt — individually and without time-consuming programming. The module operates without a fieldbus infrastructure, control system, special tools or additional cables.

For more information:

Phone: 03 9358 3400
Related Products

Flexicon mobile bag dump station with compactor

The latest mobile bag dump station from Flexicon Corporation incorporates a flexible screw...

Flexicon sanitary bulk bag filler

The latest sanitary bulk bag filling system from Flexicon can achieve fill rates of up to 40 bulk...

Datalogic AV500 2D image-based reader

The AV500 scanner has a high-resolution 5 MP sensor, image acquisition at 32 fps, dynamic or...

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd