Monitran MTN/2200, MTN/1105 and MTN-1100IS series accelerometers

Tuesday, 11 November, 2014 | Supplied by: ADM Instrument Engineering Group


Every rotating machine has its own unique vibration characteristics. Problems such as unbalance, or rolling element bearing damage cause the vibration characteristics to change. Accelerometers can be used to analyse these vibrations to provide an early warning of any potential failure.

The Monitran MTN/2200 is an accelerometer suitable for general-purpose vibration monitoring. Its top-entry design makes it easy to mount in difficult spaces and it gives a frequency range of 0.8 Hz to 12 kHz. It is sealed to IP67 and has an operating temperature range of -55 to 140°C. The internal electronics are isolated to minimise noise and offer good bias voltage stability.

For high temperature,  the accelerometers that can be mounted on surfaces up to 250°C.

For hazardous areas, where there is a risk of explosion, the company has a range of IECEx-certified accelerometers. These have been especially designed for reliability in unforgiving environments, such as mines. Specifically designed side-entry versions, such as the MTN-1100IS series require less headroom and offer streamlined cable routing from the sensor.

Online: www.admtech.com.au
Phone: 03 9551 6922
Related Products

Siemens Sitrans FMT020 transmitter

The Sitrans FMT020 is backwards compatible with existing sensors and offers extended conductivity...

Krohne OPTIBAR FC 1000 flow computer

The OPTIBAR FC 1000 is a compact flow computer for volumetric flow calculation and heat quantity...

Endress+Hauser QWX43 multisensor fermentation monitor

The Fermentation Monitor QWX43 is designed to enable a seamless and simple monitoring of...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd