The Model CG capacitance point level sensor, from Nohken, provides reliable, simple and cost-effective point level detection of liquids, solids and adhesive conductive media. It can work well with simple fluids, difficult fluids and sophisticated environments due to its innovative circuitry.
The sensor consists of an oscillation circuit and a detection circuit, the frequencies of these two circuits being automatically synchronised. This means that no initial calibration is needed, and it has a wide sensitivity range.
The sensor resists conductive coating and provides highly stable detection.
The CG sensor has a 4-digit and 8-segment graphic LCD in the housing and by pushing a button, the sensor will check the dielectric constant of the medium and automatically set the span point.
The sensor requires a 100-240 VAC supply, and can operate in temperatures of -25 to 65°C. It can withstand a maximum pressure of 1 MPa, and has a protection rating of IP65. It is available with electrode lengths of 250 or 450 mm.
Phone: 03 9540 5100
Turck FS501 flow sensor
Turck has expanded its FS+ fluid sensor series with the introduction of the FS501 flow sensor.
Rosemount QX1000 hybrid continuous gas analyser
The Rosemount QX1000 Continuous Gas Analyser is designed for use in continuous emissions...
Hach NP6000sc phosphate analyser
The Hach NP6000sc phosphate analyser is a solution designed for nutrient monitoring for water...
