Phoenix Contact wind rotor blade tension monitoring solution

Click2Contact

The RBTM (rotor blade tension monitoring) solution from Phoenix Contact continuously monitors the oscillations of wind power installation (WPI) rotor blades.

As a result of increasingly longer blades, the systems monitoring loads and oscillations must keep up with rising demands. The monitoring solution uses strain gauges glued into the rotor blades. These sensors provide measurement data for calculating the mechanical stress imposed on the rotor blades. Freely programmable digital outputs can be used to transmit an alert signal in the event that configured thresholds are exceeded. All data are also made available for performing analyses. Data transfer takes place either via an optional modem or directly via the fieldbus built into the WPI. The monitoring solution can be integrated in virtually any bus environment, including Profinet, Profibus, Modbus or CAN.

There are two versions available, depending on whether the system is to be introduced as a retrofit or is to be part of the electrical design. The box solution is suitable for retrofitting and comes with a fully preassembled control cabinet ready for mounting in the hub. The SD card solution addresses customers who want to install the controller and I/O modules into the pitch control cabinets.