Lorenz GM62 strain gauge amplifier

Wednesday, 14 September, 2011 | Supplied by: Bestech Australia Pty Ltd



The Lorenz GM62 strain gauge amplifier is a DIN rail-mountable measuring amplifier that has two parallel sensor connections. These SG signals are amplified to a standard output signal of 0 V to ±10 V.

A galvanically separated supply voltage range of 10-30 V and the analog output of 0 V to ±10 V allows for direct signal processing with PLC-control.

The slimline housing (23 mm wide) allows for space-saving assembly in switch cabinets close to the sensors on standardised DIN mounting rails. All control elements are accessible from the front behind a hinged plexiglass pane.

The adaption of the sensor sensitivity takes place on site by a DIL-switch. Preloads (tare) can be adjusted. The control switch can be activated via an external control signal or via the control key on the front.

Interference signals and transient effects of the measurement signals can be alleviated by the input filter. Sensor excitation is 6-10 V adjustable.

The adjustment of amplification, zero point and filter is possible by potentiometers.

Online: www.bestech.com.au
Phone: 03 9540 5100
Related Products

ABB LST200 ultrasonic level transmitter

The LST200 is designed specifically for industries with large installed bases of level...

Krohne OPTITEMP TRA-H6x and TRA-C6x temperature sensors

The OPTITEMP TRA-H6x/-C6x temperature sensors are designed for hygienic applications in the food...

WIKA FLM-CA and FLM-CM magnetostrictive level transmitters

With floats as small as 18 mm in diameter, the FLM-CA and FLM-CM magnetostrictive level...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd