Fluid Components International Model FS10A analyser flow switch/monitor with FM/FMc approvals

Click2Contact

The Model FS10A analyser flow switch/monitor from Fluid Components International (FCI) has received FM and FMc (Canadian) approvals.

With FM and FMc approvals, the FS10A analyser flow switch/monitor is suitable for continuous flow verification applications that support process analyser sampling systems operating in hazardous plant areas in the United States, Canada and elsewhere worldwide. The FS10A’s FM and FMc approvals are as follows: Nonincendive, Class I, Division 2 Groups A, B, C, D; Class II, Division 2 Groups E, F, G; Class III T4 at Ta=71ºC Type 4X.

The Model FS10A is designed for continuously verifying flows within liquid or gas process analyser sampling systems. It is a small, lightweight instrument featuring low flow sensitivity, a relay alarm trip point, an analog output and an RS232 interface.

The FS10A Analyser Flow Switch/Monitor features advanced electronics, packaged in a rugged, fully sealed aluminium housing. The electronics can be integral mounted with the sensor element or remotely mounted for easy front panel display viewing. The FS10A features a top-mounted, 10-LED array and two pressure-sensitive button touch controls. The LED display shows flow rate trend, alarm status and power on/off. The monitor’s set-up (span) and trip-point values can be changed via the two push-buttons or its standard RS232C serial interface.

The FS10A Analyser Flow Switch/Monitor is available with a 1A relay settable for NO or NC operation, with user-programmable switch settings for failsafe, trip control of hysteresis and time delay. The 4-20 mA output is available for trending.