FCI level sensors for OEM applications

Click2Contact

The OEM series of level sensors from Fluid Components International (FCI) are designed to offer accuracy, fast response and long-term reliability for designers of industrial equipment for process control and manufacturing operations.

These level sensors and switches feature thermal dispersion technology with solid state or relay contact outputs for use with a wide range of materials independent of conductivity or dielectric constant, and can resist a high degree of coating. Typical applications include point detection in liquid/gas, liquid/liquid, liquid/foam and foam/gas interface applications.

Two-wire loop-powered level sensors are suitable for applications with installation constraints. The company’s NuTec level switch uses a 2-wire control circuit in a NEMA Type 4X and explosion-proof enclosure.

Insertion level sensors with pigtail connections feature a remote 4-wire control board that is suitable for small or confined vessels and difficult-to-access locations.

Level and temperature-level sensors feature level point detection with an additional output parameter for temperature.

Two-wire loop-powered mass level sensors feature a small circuit board design that enables convenient mounting in user’s control system enclosures.

Integral type and wet/dry level sensors feature 24 VDC input power and provide a solution for chlorinated water and other corrosive media, as well as other aqueous or hydrocarbon fluids.

High-temperature level sensors feature pigtail connections from a small sensor to remote electronics for applications with process temperatures up to 230°C. Typical level applications include heating oil and coolant fluid reservoirs.

In most cases the sensors have wetted parts of 300-series stainless steel, while in some cases Hastelloy C-22 and CPVC are available.