Hydac CME-AU1000 fluid condition monitoring unit

Tuesday, 01 October, 2019 | Supplied by: HYDAC International

Hydac CME-AU1000 fluid condition monitoring unit

The CM-Expert Hydraulic (or CME-AU1000) is a fluid condition monitoring unit, providing a packaged solution for hydraulic and lubrication system monitoring.

The unit works by combining air bubble suppression with oil condition sensors and multiple communication options in a single plug-and-play unit.

Installation can be done with minimal impact to an existing system, in both low-pressure and high-pressure systems, as the sensors are protected from pressure and flow fluctuations.

The unit monitors a range of parameters including particle count, absolute conductivity, change in conductivity, absolute dielectric constant, relative change in dielectric constant, saturation level and temperature.

Options include the use of a HYDAC AquaSensor or HYDAC Lab, an LED display on the CS1000 particle counter and various methods of connectivity (Modbus TCP/IP, Wi-Fi and mobile network).

More information is available through an online webinar here.

Online: www.hydac.com.au
Phone: 03 9272 8900
Related Products

Endress+Hauser Micropilot FMR10B, FMR20B and FMR30B radar level sensors

The Micropilot FMR10B, FMR20B and FMR30B radar level sensors are designed for continuous level...

Endress+Hauser iTHERM SurfaceLine TM611 non-invasive thermometer

The iTHERM SurfaceLine TM611 non-invasive, surface-mounted thermometer measures process...

Krohne OPTIBAR PC 1010 compact gauge pressure transmitter

The OPTIBAR PC 1010 is an ultra-compact gauge pressure transmitter with a ceramic diaphragm.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd