Fluid Components International FS10i flow switch

Tuesday, 01 September, 2020 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

The FS10i from Fluid Components International (FCI) is a universal flow switch and flow monitor designed for simple insertion into 13 mm or larger diameter pipes and square ducts. The unit is suitable for either liquid or air/gas applications, and is fast responding and highly repeatable to both increasing and decreasing flow rate changes.

The standard 1 A relay trip point is easily set in the field for low or high trip point and the trip and reset points can be further tuned with hysteresis and time delay adjustments. Also included standard is a 4–20 mA trending output of the flow rate for connection to ancillary controls or alarm systems. The FS10i also includes a 10-LED array that provides both an indication the trip point has been exceeded (LED flashes) and of relative flow rate (10% increments) across the flow range.

The FS10i flow sensor’s thermowells are constructed of corrosion-resistant Hastelloy C-22. It can operate in fluid temperatures up to 121°C, has an IP protection rating to IP67, and has optional global agency approvals for installation in Division 2/Zone 2 locations as well as a SIL 2 compliance rating. It has no moving parts to clog and requires no routine maintenance, which saves time and expense over any mechanical-technology based flow switch.

For more information: www.ams-ic.com.au.

Online: www.ams-ic.com.au
Phone: 03 9017 8225
Related Products

ABB LST200 ultrasonic level transmitter

The LST200 is designed specifically for industries with large installed bases of level...

Krohne OPTITEMP TRA-H6x and TRA-C6x temperature sensors

The OPTITEMP TRA-H6x/-C6x temperature sensors are designed for hygienic applications in the food...

WIKA FLM-CA and FLM-CM magnetostrictive level transmitters

With floats as small as 18 mm in diameter, the FLM-CA and FLM-CM magnetostrictive level...

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd