Linking digital input and digital output to TCP/IP ethernet networks
ioLogik™ E2210 is designed for system integrators to acquire and control remote On/Off devices, such as proximity switches, mechanical switches, push buttons, optical sensors, LEDs and light switches, remotely over TCP/IP and Ethernet networks. ioLogik E2210 supports multiple protocols over Ethernet, such as Modbus/TCP, SNMP, HTTP, TCP and UDPat 100 Mbps for high-speed data acquisition. Data can be distributed to up to 10 host computers. Compared to a traditional field bus and serial interface, an Ethernet-based I/O server is more flexible for remote control and data exchange within a modern IT infrastructure.
LCD display kit for PC-free on-site configuration and management
Most remote I/O servers cannot be configured on-site. You need to carry the correct cables, a Windows computer, and the right kind of converters to determine the IP address or obtain relevant readings when you need to check the field status. ioLogik 2000 Active Remote I/O Server is equipped with an optional LCD display kit that can snap onto any ioLogik 2000 Active Remote I/O Server. You can view and configure the network settings, such as IP address, netmask and gateway by using the LCD panel. Alternatively, you can switch to I/O settings and get the analog input and output channel readings. The Easy View LCD display makes your field maintenance easier than ever.
Independent configuration for multi-functional DI and DO points
Each digital input can be configured independently for DI or Event Counter mode, and each digital output can be independently configured for DO or Pulse Output mode.
Phone: 07 3120 8700
The Schneider Electric Magelis IIoT Edge Box, with Node-RED pre-installed, is an industrial edge...
The Artila Matrix-750 wireless gateway is designed to make it easier for process industry users...
The PSS u2 ES 4IOL IO-Link master module is designed to enable communication between the...