SG Transmission Series 62 fail-safe electromagnetic brakes
The SG Transmission Series 62 electromagnetic brakes are designed for fail-safe operation. When power to the unit is interrupted, the brake is energised by a permanent magnetic disk that attracts a steel armature plate and the brake is locked. When power is returned to the coil, the brake is released, allowing motion to occur.
The electromagnetic brakes are suitable for improving safety on machines using stepper and servo motors with heavy vertical loads. If the power fails, the brake locks and the load is prevented from falling.
The brakes use rare earth permanent magnets and efficient 24 VDC coils to reduce heating and power consumption. Holding torques range from 0.4 to 30 Nm with a range of sizes from 28 to 110 mm diameter. The brakes are asbestos free.
Phone: 08 9309 1896
pco.dimax 3.6 DS ST CLHS high-speed camera
The pco.dimax 3.6 DS ST CLHS is a high speed, double-shutter camera engineered to capture...
Kollmorgen Essentials hygienic servo drive
Kollmorgen Corporation has expanded the application range of its Kollmorgen Essentials Servo...
Turck B1N180V-QR20 inclination switch
The B1N180V-QR20 inclination switch is a single-axis sensor using MEMS acceleration measurement...
