The Sopa air gap sensor is designed to be used in tooling applications to make sure that a part is seated properly in a jig before it is machined, welded or assembled. It is able to measure gaps of between 20 and 200 micron. The Sopa air gap sensor is precise enough to detect if a work piece is obstructed by a human hair.
The sensor consists of a control module and up to four sensor modules. The control module has a built-in pressure regulator and is responsible for delivering regulated air to the sensor modules, as well as delivering higher pressures to clean the nozzles.
Phone: 1300 88 96 96
TR Electronic WPS encoder cable pull mechanism
The WPS cable pull mechanism for the C__582 series rotary encoders from TR Electronic is designed...
Turck BIxR-W20 series inductive ring sensors with IO-Link
Turck has expanded its sensor portfolio with a new range of inductive IO-Link ring sensors...
NORD Drivesystems NORDAC FUSION drive solution
NORDAC FUSION combines asynchronous motors (IE3) and permanent magnet synchronous motors (IE5+)...
