Hydac EDS 3300 pressure switch with IO-Link
The EDS 3300 with IO-Link communication interface is a compact electronic pressure switch with integrated digital display for relative pressure measurement in the low pressure range. It has a switching output and an additional output that can be configured as switching or analog output (4–20 mA or 0–10 V).
Via IO-Link, process data, parameters and diagnostic information from the pressure switch can be transmitted via a standard cable (SDCI mode). The integrated LED display provides information on the operating mode and the switching statuses.
The IO-Link master saves the parameters of the connected pressure switch and transmits them to the newly connected pressure transmitter when replaced. Thus, time-consuming new parameterisations will no longer be required.
If IO-Link is not used, the sensor still functions as a pressure switch with two switching outputs (SIO mode).
To create user-specific small series or to duplicate sensor settings across the system, the sensor can also be easily adjusted outside the system to suit the particular application, with the HYDAC Programming Device HPG P1-000, the HYDAC Programming Adapter ZBE P1-000 or by means of the Portable Data Recorder HMG 4000.
Typical fields of application for EDS 3300 IO-Link are machine tools, handling and assembly automation, intralogistics or the packaging industry.
For more information: https://www.hydac.com.au/products/electronics/pressure-switches/eds-3300/.
Phone: 03 9272 8900
The ELZU 3-axis actuator system consists of two y-axes and one x-axis that uses two motors and is...
Balluff has released ceramic caps that can increase sensor life, by withstanding high...
The TOP rotary limit switch from TER is suitable for most environments due to its waterproof and...