Advantech UNO-2184G and UNOO-2174G open architecture automation controllers

Click2Contact

Advantech has launched two open architecture embedded controllers. The UNO-2184G is a high-end, high-performance model designed for applications that require a large amount of graphical processing power while the UNO-2174G is a mid-end controller for industries that require faster performance, but not the 3D capabilities of the 2184G. Both benefit from the industrial design technique of isolated chassis and logic grounds for increased stability and reliability.

The UNO-2184G comes with an Intel Core i7-2655LE processor and the UNO-2174G comes with an Intel Celeron 847E processor. Both models can support up to 16 Gb DDR3 RAM (with 4 Gb/8 Gb RAM onboard or built in), a dedicated Intel HD graphics processor, and are completely fanless enabling them to operate in temperatures as low as -10°C and as high as 60°C.

The core i7 CPU on the UNO-2184G supports AMT 7.0, which is hardware-based technology for remotely managing and securing PCs.

Both models come with the following hardware configuration: three display ports (DVI, HDMI and Display Port, allowing two simultaneous connections); six USB 2.0 ports; two Mini PCIe sockets and SIM card slot card ready for additional third-party cards such as WLAN, 3G, GPRS, and GPS; four gigabit LAN ports which support teaming functionality such as fault tolerance, link aggregation and load balance features; dual COM ports that support RS232, 422 and 485 with automatic flow control and support for any baud rate; and, using the powered e-SATA port, a backup hard drive or USB device can also be connected.