Redundancy modules are used for building N+1 and 1+1 redundant power supply systems, where it is critical that a control circuit remains powered even if a power supply was to fail.
Some of the key features of the PULS MOSFET redundancy modules are low power losses and voltage drop due to MOSFET technology, short circuit output protection, reverse polarity protected inputs, 160% overload capability for 5 s and a plug connector on the output of the YR40.245 model, which means that the module can be hot swapped without the need to turn off power to the load.
The range includes modules that have two 20 A inputs and one 40 A output, one 40 A input and output, as well as a model with two 40 A inputs and one 80 A output. Voltages range from 12 to 56 VDC depending on the model.
Phone: 1800 557 705
Phoenix Contact Trio Power power supply
The third-generation Phoenix Contact Trio Power power supply is now available with a protective...
Phoenix Contact PTCB 48 VDC circuit breakers
The PTCB single-channel circuit breakers can now protect loads with a supply voltage of 48 VDC.
NORD Drivesystems single-phase IE2 motors
The more efficient single-phase asynchronous motor now corresponds to efficiency class IE2.
