Phoenix Contact Ethernet patch panels

Tuesday, 29 May, 2018 | Supplied by: Phoenix Contact Pty Ltd

Phoenix Contact Ethernet patch panels

Ethernet patch panels enable a quick and easy connection between the field and control cabinet cabling. Eight DIN rail devices from Phoenix Contact provide various connection options. In the covered wiring space, IDC, push-in and screw connection technologies simplify the installation of the field cable.

The cable shielding is connected without tools with strain relief assured at the same time, saving time during installation. The optional surge protection protects the connected end devices, therefore increasing system availability. The additional shield current monitoring system enables valuable diagnostics. Any shield currents present, caused by different potentials or EMC, are indicated via an LED. Problems in the installation are indicated immediately, without the need for extensive measurements.

The range is complemented with 12 PoE injectors, which can supply remote Ethernet devices such as cameras with data and electricity via a shared cable. Along with these technologies, the devices are available with up to 60 W power and an electrically isolated power supply unit.

Online: www.phoenixcontact.com.au
Phone: 1300 786 411
Related Products

Phoenix Contact Trio Power power supply

The third-generation Phoenix Contact Trio Power power supply is now available with a protective...

Phoenix Contact PTCB 48 VDC circuit breakers

The PTCB single-channel circuit breakers can now protect loads with a supply voltage of 48 VDC.

NORD Drivesystems single-phase IE2 motors

The more efficient single-phase asynchronous motor now corresponds to efficiency class IE2.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd