igus Lean Robotics retaining fixture for cobots

Tuesday, 27 August, 2019 | Supplied by: Treotham Automation Pty Ltd


The Lean Robotics retaining fixture for cobots from igus is produced by injection moulding and has a uniform size. The retaining fixture can be installed in seconds with a Velcro strip and is available in three options to allow the universal safe guidance of cables for data and energy.

The Lean Robotics retaining fixture is attached directly on the robot in two steps: place the Velcro around the robot arm and fix it. Due to the Velcro fastener, the user has the opportunity to use the new retaining fixtures without any tools on any robot of their choice, and due to the flexible plastic, they can also be installed on another cobot at any time.

The retaining fixture is available in three versions: the standard version has two continuously adjustable Velcro straps in a universal size and a rubber lining inside, so that the straps are fixed on the arm without the risk of slipping. This option is also available with a mounting bracket with and without strain relief. In a third option, the retaining fixture can also be equipped with a protector for additional security. The retaining fixtures are suitable for use with the triflex R series TRC/TRE/TRL 30, 40 and 50 as well as for all commercially available protective hoses with different diameters.

Online: www.treotham.com.au
Phone: 1300 65 75 64
Related Products

E2S Warning Signals D2xB1LD3 LED emergency beacon

The D2xB1LD3 LED beacon generates an effective candela rating of 82.1 cd under UL1971 test...

NORD Drivesystems IE5+ PM synchronous motors

NORD Drivesystems recently launched a permanent magnet synchronous motor offering high energy...

APS Industrial DB Ultimate distribution boards

The DB Ultimate range of distribution boards is built for compatibility with Siemens circuit...

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd