High-force nozzle

Tuesday, 07 April, 2009 | Supplied by: Compressed Air Australia Pty Ltd



Exair’s 1¼" Super Air Nozzle delivers 4252 g of force when mounted 305 mm away from the target. The force is more than 12 times that of ordinary air nozzles, making it suitable for blowing heavy materials or for applications where the air nozzle can’t be mounted close to the surface to be blown off, dried or cooled.

The compressed air is ejected through a series of holes located in recessed grooves on the nozzle surface. The aerodynamic design of the nozzle directs the air to a single point of convergence, delivering a concentrated stream of high-velocity airflow with hard-hitting force. This ensures safe operation since the airflow that exits the nozzle cannot be blocked, as required by OSHA standard 1910.242)b). At 80 psig, the air consumption is 188 SCFM. The typical sound level reduction from ordinary open pipe is 27 dBa, bringing the noise to acceptable levels required by the OSHA maximum allowable noise exposure standard 29 CFR 1910.95(a).

The zinc aluminium alloy construction makes the nozzle suitable for rugged industrial applications. A 51 mm hex body is provided for easy installation using a standard wrench or socket. Applications include: ejection of heavy parts, drying, machinery and parts cleaning, chip removal, liquid blowoff, and cooling hot parts.

Online: www.caasafety.com.au
Phone: 08 8983 3999
Related Products

Mettler Toledo oxygen measurement guide

Mettler Toledo has produced a guide for the process industries that explains the measurement...

Mettler Toledo pH sensors operating guide

Mettler Toledo has released a booklet describing good operating procedures for pH sensors, aimed...

Honeywell Process Solutions LEAP project services

Honeywell Process Solutions has launched its LEAP project services (Lean Automation of Automation...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd