Lower for longer: extended downturn for chemical sector


By Joseph Chang, Global Editor, ICIS Chemical Business
Monday, 06 April, 2020


Lower for longer: extended downturn for chemical sector

Commodity market intelligence service Independent Commodity Intelligence Services (ICIS) has reported that the global chemical sector should prepare for an extended downturn along with lower-for-longer oil prices, both of which will have big implications for profitability and investments.

“It’s very possible that Q3 could have negative GDP as well [as Q2], and then the question is, how big is the bounce back towards the end of the year?” said Rhian O’Connor, ICIS lead analyst, demand forecasting in an ICIS webinar this week. “If everything goes back to normal on day one, we’re looking at quite a strong quarter-on-quarter growth through the second half of the year. However, a lot of people have lost their jobs, savings and businesses. We’re not all going to rush out after this crisis and buy a car or fridge.”

The analyst also cited an Oxford Economics survey which showed more than a third of participants expecting three or more quarters of negative global GDP.

The manufacturing purchasing managers’ indexes (PMIs) show the damage thus far with the 50-level delineating expansion versus contraction in activity. The ISM US Manufacturing PMI for March fell to 49.1 from 50.1 in February while the IHS Markit Eurozone Manufacturing PMI sunk to 44.5 in March versus 49.2 in February. The Caixin China General Manufacturing PMI snapped back to 50.1 in March from a record low of 40.3 in February.

For a larger image, click here.

Extended downturn, compressed spreads

“Our view is that demand for this year, and possibly going into 2021 will not return to pre-crisis levels,” said O’Connor. “We are going to see a more extended downturn than we were expecting, and then a slower recovery than many are forecasting.”

Crude oil prices will also likely be lower for longer even if there is a deal between OPEC and Russia or if Saudi Arabia agrees to curtail production, she noted.

For petrochemicals, the spread over oil prices should also be squeezed in a global recession with lower volumes, O’Connor said.

Barbara Ortner, head of market reporting at ICIS, cited major drops for European ethylene, propylene and benzene contract prices on 31 March. For Europe benzene, the April contract plunged 70% from March, settling at a record low of €171/tonne. Ethylene April contracts fell by a record €200/tonne, to €720/tonne, while propylene dropped by €175/tonne, to €650/tonne.

China bounces but outlook challenging

While China’s manufacturing economy is getting back on track and local demand is improving, it will encounter extremely difficult export conditions.

“Companies with exposure to automotive and industrial customers are starting to run at full employment capacity but not necessarily at full operating rates,” said Jim Sheehan, US chemicals equity analyst at SunTrust Robinson Humphrey. “These facilities are just running to meet demand.

“With demand rebounding in China, that may sound like a positive thing but the outlook for Q2 is that we’re going to have a major economic contraction and China may not be exporting into very healthy markets. So it remains to be seen what level of activity we normalise at in China.”

Oil forecasts slashed

Meanwhile, analysts are taking down crude oil price forecasts for 2020 and beyond.

“We lowered our already-bearish oil priced deck further as coronavirus containment cuts into global oil demand, while the balance is getting longer on the supply side due to the OPEC+ schism,” said Ed Morse, global head of commodities at Citi. “We now see Brent averaging $30/bbl this year and $17/bbl in Q2.”

In his base-case scenario, Morse sees Brent recovering to about $42/bbl by Q4 2021, still far below the $60+/bbl level before the crude oil crash in late February to March.

“The rapid shuttering of business activity in Europe and North America, even as China is recovering, should lead to a hit to demand on the order of 16m bbl/day or more in Q2 and an overall decline of 8.7m bbl/day in 2020 in Citi’s base case,” said Morse.

In his bear case, crude oil demand falls by around 20m bbl/day in Q2 and 10.6m bbl/day for all of 2020.

Global PE margins

The dramatic drop in crude oil prices has turned everything on its head — the US petrochemical cost advantage in particular.

“The ethane advantage US producers had is gone. Lower oil means lower naphtha and lower European production costs, so the once advantaged US is not advantaged anymore,” said O’Connor.

This presents a problem for US polyethylene (PE) producers in particular who have ramped up capacity with world-scale cracker projects for the export market.

“It all depends on what the price of crude oil is long term,” said Sheehan. “Crude oil would have to get back above $50/bbl for some of these large projects to make sense economically and I’m not optimistic about a return to $50 anytime soon.”

“On capacity additions in the US, a lot of them are being slowed down or postponed. We’re seeing this across the board — not just in the ethylene chain. Many companies are announcing that they’re reviewing and assessing their capital spending plans for 2020 and if the crisis were to continue in 2021, we would probably see the same thing next year,” he added.

In the meantime, with the plunge in oil and naphtha feedstock prices, integrated PE production in Europe is seeing renewed profitability, completely flipping the US advantage.

European spot high density PE (HDPE) margins using naphtha feedstock have rocketed to $1069/tonne as of 27 March, according to ICIS Petrochemical Analytics. That compares to $574/tonne for US HDPE using ethane feed. Asia HDPE margins using naphtha were $565/tonne, running neck and neck with the US now after being negative through much of November and December 2019.

However, these robust margins are not sustainable in the face of global recession combined with overcapacity. Expect all these margins to come down as PE as well as co-product propylene and butadiene prices decline further.

“China is still building [ethylene and derivatives capacity] as well, and that’s not slowing because it’s not for economic but self-sufficiency reasons — to untangle their supply from the rest of the world,” said O’Connor. “And in a world where we have structurally lower global demand, at least for one to two years, we’re going to see oversupply and that’s going to impact cracker decisions everywhere.”

Top image credit: ©stock.adobe.com/au/photollurg

Related News

Manufacturing contraction eases in May

The Australian Performance of Manufacturing Index shows a continued contraction under the effects...

BP Australia announces WA hydrogen feasibility study

BP says the study will help it and the wider energy sector better understand the possibilities of...

No hands door handles open new markets

A manufacturer in South Australia is thinking on its feet as it identifies gaps in the market...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd