Pneumatics & hydraulics > Pumps

Emergency standby pumping capability?

02 May, 2011

When the storm is raging in the middle of the night, the last thing you want to hear is the phone ringing off the hook to tell you that four of your pump stations are down and all hands are needed. Do you have emergency standby pumping capability?


GIW HVF high-volume froth pump

28 April, 2011 by

GIW Industries has launched a high-volume froth (HVF) pump that can pump froth without airlocking. The HVF provides continuous operation without shutdown or operator intervention. Its hydraulic design removes air from the impeller eye while the pump is running, so the process can be kept moving, improving efficiency.


SSP Pumps Series A rotary lobe pump

25 February, 2011 by

The Series A rotary lobe pump from SSP Pumps is designed for applications within general industry and the mining, chemical and waste water industries.


Special pumps for crude oil caverns

23 January, 2011

KSB Group has supplied Scandinavian Tank Storage Sweden with pumps intended for discharging crude oil from an underground rock cavern.


KSB RDLO axially split case water pump series

17 January, 2011 by

The RDLO series of axially split case water pumps offers hydraulic efficiencies up to 91% at BEP, using double volute casings and three different impeller profiles in most sizes for optimum selection and hydraulic stability.


Securing Sydney’s water pumping needs

05 January, 2011

ABB’s high-efficiency motors and variable speed drives have provided an energy-efficient solution for transporting large volumes of desalinated water from Sydney’s newest water supply to over 1.5 million Australian residents living in New South Wales.


Moog Speed Controlled Pump System

20 December, 2010 by

Moog has released a pump system designed to provide injection-moulding and blow-moulding machine builders with a motion control solution that can lower energy consumption in hydraulic machines by up to 30%. The Moog Speed Controlled Pump System is based on three of Moog’s products - a fixed displacement radial piston pump (RKP), a brushless servomotor and a modular multi-axis programmable motion control servo drive (MSD).


Optimising energy efficiency in hydraulic systems

01 October, 2010 by Dr Dirk Kollmar and Christian Appel, KSB Germany

Considering that approximately 20% of global electric energy production is consumed by motor-driven pump sets, they offer a large potential to save energy.


Solving application problems for wastewater pumping stations

01 September, 2010 by Hydro Innovations

Download this white paper if any of your objectives are to: cope with peak wet weather flows; cope with power outages during peak flows; lower costs over the life of the pump station installation; improve OH&S at pump stations; remove confined spaces issues.


Vanton Pump Chem-Gard CGMC thermoplastic centrifugal pump

23 August, 2010 by

The Chem-Gard CGMC close-coupled, magnetically driven thermoplastic centrifugal pump from Vanton Pump is available in sizes from 38 x 25 x 152 to 76 x 51 x 203 mm for flows to 91 m3/h at heads to 50 m TDH.


Pulsafeeder PulsaPro 900 process and metering pump

19 July, 2010 by

Pulsafeeder PulsaPro 900 is a hydraulic diaphragm process and metering pump specifically developed for applications such as the oil and gas, chemical, and petrochemical industries.


Pumping abrasive and shear-sensitive liquids

28 June, 2010

Understanding a fluid’s rheology is fundamental in designing an efficient pumping and process solution.


SAM Hydraulik MD10 series of axial piston pumps

23 June, 2010 by

The SAM Hydraulik MD10 series of axial piston pumps is suitable for medium-pressure use, in closed loop applications. Rated at 250 bar (3600 psi) for continuous use, these pumps can take a peak pressure of up to 350 bar (5000 psi).


Hydac screw pumps

06 May, 2010

The Hydac screw pumps are suitable for industrial applications where high reliability and low noise are required. They produce low vibration and are optionally coupled with electrical motors.


Hydraulic power pack pump

12 October, 2009 by

The Cactus electric hydraulic power pack pump is used to power small- to medium-sized hydraulic cylinders and tools. Being lightweight, at 9.5 kg, and compact in design, the unit is easy to transport for on-site applications.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd