Crystal XP2i pressure gauges with PV411 hand pumps
30 April, 2013 | Supplied by: TechRentalsThe Crystal XP2i pressure gauges with PV411 hand pumps are available for rent in various pressure ranges from 15 psi (1 bar), to 10,000 psi (689 bar) with NATA-certified accuracy.
McCrometer Mc Propeller flow meter
29 April, 2013 | Supplied by: AMS Instrumentation & Calibration Pty LtdThe Mc Propeller flow meter is especially suited to dirty water flows, municipal and other high-volume water applications.
KEM TRICOR range of Coriolis mass flow meters
29 April, 2013 | Supplied by: Control Components Pty LtdTRICOR Coriolis mass flow meters are now available with IECEx hazardous area approval. Free from moving parts, these instruments provide accurate measurement of even aggressive and contaminated media.
ifm efector mid compact flow meter
22 April, 2013 | Supplied by: ifm efector pty ltdThe efector mid compact flow meter from ifm efector monitors volumetric flow quantities, total quantities and temperatures. Additionally, the measuring and evaluation units of this sensor are combined in a compact housing.
Condumax II hydrocarbon and water dew-point analyser increases confidence in gas quality
21 April, 2013 | Supplied by: AMS Instrumentation & Calibration Pty LtdMichell Instruments enabled a natural gas storage operator to improve the hydrocarbon and water dew-point measurements at its natural gas storage site in Europe.
ifm efector TAD series temperature transmitters
19 April, 2013 | Supplied by: ifm efector pty ltdifm efector’s TAD series of temperature transmitters, with integrated drift monitoring, diagnostic function and backup function, monitors temperatures with 0.2 K accuracy.
Sensorex TX-3000 pH/mV transmitter for process monitoring
18 April, 2013 | Supplied by: Envirosensors Pty LtdSensorex’s TX-3000 pH/mV transmitter monitors changes in process fluids, displaying pH or oxidation reduction potential and temperature for more accurate control.
IMI Sensors Model 640B01 loop-powered vibration transmitter
17 April, 2013The Model 640B01 is a 4-20 mA output vibration transmitter for permanent installation with a measurement range of 0 to 25.4 mm/s peak and a frequency range of 3-1000 Hz.
Precision Digital PD6801 ProtEX level meter
05 April, 2013 | Supplied by: Precision Digital CorporationThe PD6801 ProtEX level meter is an easy-to-read, 4-20 mA, loop-powered, explosion-proof meter designed for safe or hazardous environments, such as oil wells or chemical storage.
Precisive 5 compact hazardous area-compliant gas analyser
04 April, 2013 | Supplied by: Australian Dynamic Technologies Company Pty LtdThe Precisive 5 gas analyser requires no carrier gases, no calibration gases and offers fast-response analytics without compromising accuracy, repeatability, linearity or stability in the presence of interferences.
West 8010+ digital process indicator
03 April, 2013 | Supplied by: Automated Control Pty LtdThe West 8010+ digital process indicator provides a high-contrast, high-visibility display. The indicator is designed for optimal ease of use in a wide variety of temperature and process applications.
Asahi AL512 loop-powered digital indicator
29 March, 2013 | Supplied by: Bestech Australia Pty LtdApplications for the Asahi AL512 loop-powered indicator include any situation where 4-20 mA signals are to be displayed and require visual reading from a few metres away.
Dwyer Series VBS vibration switch
29 March, 2013 | Supplied by: Dwyer Omega (Aust) Pty LtdThe Series VBS vibration switch is compact and uses two easy set-up dials that adjust the maximum RMS velocity set point and false trip time delay.
Dwyer Series IEFS insertion electromagnetic flow sensor
15 March, 2013 | Supplied by: Dwyer Omega (Aust) Pty LtdThe Series IEFS insertion electromagnetic flow sensor comes in brass or stainless steel allowing it to handle a wide range of pressures and temperatures.
Mettler Toledo GPro 500 laser gas analyser/oxygen sensor
15 March, 2013 | Supplied by: Mettler-Toledo LtdThe GPro 500 laser gas analyser uses tunable diode laser technology to provide a significant improvement over extractive analysis systems.
