LumaSense Technologies BoilerSpection infrared thermal imaging system
13 April, 2015 | Supplied by: W&B Instruments Pty LtdThe BoilerSpection infrared thermal imaging system is designed to assist with the detection and removal of the ash and slag on boiler tubes that reduces efficiency - without the necessity of shutting down the furnace.
Sierra Instruments InnovaSonic ultrasonic transit-time flow meters
06 April, 2015 | Supplied by: Procon Instrument TechnologySierra has redesigned its ultrasonic flow meter product line to use similar components and improve usability, allowing Sierra to pass cost savings to customers with improved precision.
Mettler-Toledo TDL analysers receive Frost & Sullivan award
02 April, 2015 | Supplied by: Mettler-Toledo LtdBased on its recent analysis of the process tunable diode laser (TDL) analysers market, Frost & Sullivan has recognised Mettler-Toledo AG with the 2014 Global Frost & Sullivan Award for Competitive Strategy Innovation & Leadership.
Gas analysers provide double safety assurance in subsea compression
02 April, 2015 | Supplied by: AMS Instrumentation & Calibration Pty LtdTwo of Michell's gas analysers have been selected to ensure safety as part of a subsea process intervention system (SPIS).
Dwyer Model ULSM ultrasonic level sensor
30 March, 2015 | Supplied by: Dwyer Omega (Aust) Pty LtdThe Model ULSM ultrasonic level sensor provides non-contact, continuous ultrasonic level measurement of fluids for medium-range applications. It is suitable for use with dirty, corrosive or sticky fluids.
Moore Industries THZ3 and TDZ3 dual sensor temperature transmitters
12 March, 2015 | Supplied by: Moore IndustriesThe dual sensor input allows the THZ3 and TDZ3 to offer backup and failover protection, or to provide average or differential measurements.
optek turbidity meters and colorimeters
04 March, 2015 | Supplied by: AMS Instrumentation & Calibration Pty LtdThe optek inline turbidity meters can be specified to measure turbidity, haze, clarity and optical density, while the optek colorimeters are suitable for many real-time measurements for improved process control.
Keller M5 series miniature pressure sensors
26 February, 2015 | Supplied by: Bestech Australia Pty LtdCapable of measurement rates of up to 50 kHz, the pressure sensors in the Keller M5 series are intended for operating temperatures between -40 and +180°C with a narrow total error band (including temperature errors) of ±1%.
VEGAPULS 69 radar level instrument for bulk solids
24 February, 2015 | Supplied by: VEGA Australia Pty LtdThe VEGAPULS 69 radar level instrument operates at a frequency of 79 GHz, which allows improved focusing of the transmitted signal and better detection of materials with poor reflective qualities.
Metrohm-Applikon ADI 2045TI wet chemical process analyser
17 February, 2015 | Supplied by: Metrohm Australia & New ZealandThe ADI 2045TI is a wet chemical analyser for process lines and can be configured for a wide range of applications.
Emission monitoring benefits for power plants
09 February, 2015 by John Immelman | Supplied by: SICK Pty LtdMonitoring and measuring the emissions of all process plants can give an indication of the levels of pollution being exhausted into the atmosphere and, as importantly, the degree of efficiency of the plant. In many cases, if the plant efficiency is improved, the emission of pollution is significantly reduced; win-win for everyone.
AMETEK Land SPOT infrared pyrometers
06 February, 2015 | Supplied by: OneTemp Pty LtdThe SPOT line of infrared pyrometers uses a pulsed green LED to confirm spot size and focus, eliminating the safety concerns found with laser-based sighting.
Kari float switches
05 February, 2015 | Supplied by: Control Components Pty LtdThe Kari float switch range from Finland offers multiple switch points for tangle-free pump control and level alarms in process and wastewater applications.
Krohne OPTIWAVE 5200 C/F radar level meter
05 February, 2015 | Supplied by: KROHNE Australia Pty LtdThe OPTIWAVE 5200 C/F is a 10 GHz FMCW 2-wire loop-powered radar level meter for liquid applications in up to a 30 m measuring range.
Krohne H250 variable area flowmeter
04 February, 2015 | Supplied by: KROHNE Australia Pty LtdThe H250 variable area flowmeter with M40 indicator is suitable for the flow measurement of liquids, gases and saturated vapour in the process industries and has a modular design.
