ICP Electronics V-Rack series antivibration rackmount server cabinets
21 March, 2013 | Supplied by: ICP Electronics AustraliaThe V-Rack series server cabinets feature a rugged shockmount design, and is constructed from high-quality aluminium and steel, creating a space for hardware to be safe from virtually all disruptions, including constant vibration or incidental impact.
Allen-Bradley SMC-50 smart motor controller
20 March, 2013 | Supplied by: Rockwell Automation AustraliaThe SMC-50 smart motor controller includes a newly designed three-phase, fully solid-state, silicon-controlled rectifier (SCR) power structure.
Siemens Metals Technologies Simetal Opal laser alignment system for casting plant rollers
19 March, 2013 | Supplied by: Siemens LtdSimetal Opal from Siemens Metals Technologies provides operators of continuous casting plants with an integrated laser measurement system for exact alignment of strand guide rollers.
Infratec VarioCAMhr high-resolution thermal imaging camera
18 March, 2013 | Supplied by: SciTech Pty LtdThe VarioCAMhr is a high-resolution camera for high thermal imaging performance that has a modular device concept to permit the camera equipment to be custom designed.
Fluke 9190A Ultra-Cool Field Metrology Well
04 March, 2013 | Supplied by: Fluke Australia Pty LtdThe 9190A is a small, lightweight dry-block calibrator suitable for pharmaceutical, biomedical and food processing applications that demand strict quality control and regulatory process compliance.
Weidmüller VPU series surge protectors
01 March, 2013 | Supplied by: Weidmuller Pty LtdWeidmüller has released a range of surge protection devices that meet the IEC 61643-11 and EN 61643-11 standards while exceeding Australian standards.
Meanwell SDR-960 series DIN rail-mounted power supplies
28 February, 2013 | Supplied by: Soanar LimitedThe SDR-960 series of DIN rail-mounted power supplies has built-in power factor correction, an input voltage range of 180-264 VAC and free-air convection cooling.
Softing Profibus 4 Profibus tester
27 February, 2013 | Supplied by: TechRentalsThe Softing Profibus 4 is an all-in-one tester for bus physics and communication, and allows full testing of live Profibus segments with minimum influence on their operation. It is available to rent.
Aegis SGR conductive microfibre shaft grounding ring
15 February, 2013By protecting bearings from electrical damage, the SGR extends motor life, preventing bearing noise, downtime, and costly motor repairs and replacements.
PULS CPS20-series DIN rail power supply
15 February, 2013 | Supplied by: Control Logic Pty LtdThe PULS CPS20-series DIN rail power supply requires only 65 mm of space on the DIN rail and delivers 24 V, 20 A or 48 V, 10 A.
Fluke VT02 Visual IR Thermometer
14 February, 2013 | Supplied by: Fluke Australia Pty LtdThe VT02 Visual IR Thermometer is a troubleshooting camera with an infrared heat map designed to fill the gap between single-point infrared thermometers and high-resolution thermal imagers.
Fluke Corporation recalls digital clamp meters
11 February, 2013 | Supplied by: Fluke Australia Pty LtdFluke Corporation is voluntarily recalling certain digital clamp meters that were manufactured between 1 September 2010 and 1 October 2012, due to a manufacturing fault that may present a hazard to personnel.
PCA Encoder Laboratory shaft encoder tester
04 February, 2013 | Supplied by: Plant Control & AutomationThe Encoder Laboratory is designed to test and simulate all aspects of an incremental shaft encoder, or any other instrument which produces a square wave output signal, such as linear encoders and flow meters.
Acromag TT230 series isolated transmitters
31 January, 2013 | Supplied by: Metromatics Pty LtdThese signal conditioners are only 12.5 mm wide for high-density mounting on DIN rails and provide a convenient USB connection to a PC for simple, precise configuration using Windows software.
WIKA GA15 SF6 leak detector
31 January, 2013 | Supplied by: TechRentalsThe WIKA GA15 SF6 is a fast-response leak detector that is used to test leak tightness of SF6-filled compartments, and for finding leakages on aged equipment.
