Directory Search



Applied Measurement Aust Pty Ltd

Sensors for pressure, force, torque, displacement, tilt, strain, weight and acceleration. Services also include design, testing and calibration. NATA certified laboratory ISO 9001-2002 accredited.


Website: http://www.appliedmeasurement.com.au
Email: jmellors@appliedmeasurement.com.au
Phone: 03 9568 0588
Fax: 03 9568 0787
Address:
14 Dalgety Street , Oakleigh VIC 3166 (Directions)

Products

Colour and gloss sensor

The SI-Colo-GD-40 sensor from Sensor Instruments allows both simultaneous and outside-light-independent detection of colour and gloss value. The colour value x,y and the grey value INT are determined by way of the integrated RGB detector.

Piezoelectric accelerometer

The Measurement Specialties model EGPE-2A is a piezoelectric charge mode accelerometer designed for high-frequency vibration and shock measurements.

AccuStar electronic inclinometer

Available in a range of ±60°, the AccuStar electronic inclinometer is an accurate angle measurement device. The compact and rugged sensor is suitable where space is critical and environmental conditions are serious design concerns.

AccuStar inclinometer

Available in a range of ±60°, the AccuStar electronic inclinometer is an accurate angle measurement device. The compact and rugged sensor is suitable where space is critical and environmental conditions are serious design concerns.

Positek linear position sensor

The Positek A111 LIPS (linear inductive position sensor) is ANZEx approved for use in potentially explosive gas, vapour and dust atmospheres and mining environments. The A111 is a durable, high-accuracy position sensor, designed for industrial and scientific feedback applications. The unit is highly compact and space-efficient, being responsive along almost its entire length.

UltraStable US5100 pressure transducer

The UltraStable US5100 pressure transducer from Measurement Specialties features a total error band of just 0.75%. It exceeds the latest heavy industrial CE requirements — including surge protection — and is voltage surge protected in both positive and reverse polarity.

UMM load cells

Dacell UMM load cells are suitable for both compression or tension usage. These load cells are extremely small and lightweight, and are rated to protection class IP67.

Strain gauges

The N11 series from Showa Measuring Instruments includes single axis, general purpose-type foil strain gauges.

Applied Measurement linear position sensor

The LCIT series is based on a patented linear position sensor design that features all of the benefits of current LVDT (linear variable differential transformer) inductive technology, but at a significantly lower cost.

Draw wire position transducers

WayCon Positionsmesstechnik is a manufacturer of draw wire position transducers for industrial use. Due to its small overall size, short assembly time and possible customisation, the SX sensor technology is a cost-effective and flexible solution for a wide range of industrial applications.

Dacell CWW load cells

The Dacell CWW series hollow type load cells are slim and lightweight. With capacities ranging from 50 kgf to 200 tf, they are suitable for use in civil engineering applications such as tunnel supports and soil pressure testing. The cells are IP67 rated. They feature a nonlinearity specification of 1% of rated output, repeatability of 0.5% and a zero balance of 0.5% also.

Low frequency monitoring

Measurement Specialties' Model 4000 accelerometer is a signal conditioned accelerometer with integral temperature compensation. Specifically designed for low frequency monitoring in transportation, test, instrumentation and vibration sensing applications, the lightweight device features a VDC output with a ±2.5 V reference that offers end users a single-ended output or the capability to use in a differential configuration.

Categories

Brands

  • All content Copyright © 2019 Westwick-Farrow Pty Ltd